PPE
This is the mark on approved Safety Glasses
What is Z87?
This type of fire consists of paper, wood, and other combustibles.
What is a Type A fire?
This is the sum of 1/2" + 5/8"
What is 1 1/8"?
This the metal end of a tape measure.
What is the hook?
This is the deadliest of the Fatal Four job site accidents.
What is Slip, Trip, and Fall?
This is to be worn on a job site to be more visible.
What is a High Vis Safety Vest?
This is the acronym for the use of a fire extinguisher, and it's meaning.
What is PASS
Pull the pin
Aim at the base of the fire
Squeeze the lever
Sweep from side to side
This is the sum of 2 9/16? + 3 9/16"
What is 6 1/8"?
This is the spring loaded metal strip with numbers on it.
What is the tape or blade?
A ____________ job site is a safe one.
What is Clean?
This is the working height when Fall Protection is needed.
What is 6'?
This must not ever be blocked>
What is a Fire Exit?
This is the sum of 16 3/8" + 18 11/16"
What is 35 5/16"?
This is the length a tape can extend before it collapses.
What is Standout?
This type of activity is often dangerous and can cause injury.
What is Horseplay?
These are the PPE worn when grinding on cast iron on a job site with high noise. (minimum)
What is Eye Protection and Hearing Protection?
This type of fire is a cooking fire, consisting of grease or fats.
What is a Type K fire?
This is the remainder of 38 13/16" - 17 3/8"
What is 21 7/16"?
In this type of measuring, you put an inch mark on the line before measuring, and subtract it after for an accurate measurement.
What is "Burn an Inch"?
This could get caught in moving parts or equipment, and cause serious injury.
What is loose clothing or jewelry?
This organization rests and certifies Safety Equipment.
What is NIOSH?
This is the time of day most job site fires start.
What is Towards the end of the workday?
This is the sum of 4' 2 1/8" + 6' 11 11/16"
What is 11' 1 13/16"?
In this type of measuring, you measure from the left, make a mark, then measure from the other side to the same mark. The measurement is the sum of both
What is Double Measure?
This is another name for a steel plate in a steel toed boot.
What is a shank?