Body filler
Detailing
Paint/Primer
Panel Repair
Tool Identification
100
Hardener comes in 2 colors, what are they
What is Blue and Red?
100
This Cleaner can be used on many surfaces
What is All Purpose Cleaner?
100
This product protects the metal surface from rusting and makes paint stick better
What is Primer?
100
A dent so small it is barely visible
What is a Ding?
100
What is this tool called
What is a Heel Dolly?
200
Body filler requires time to _________ before _______
dry before sanding
200
When cleaning a window always check for
What is streaking?
200
This document gives information on how to mix and use the product
What is Technical Data Sheets?
200
after removing the paint from the damaged area the technician can use this tool. You would weld a pin to pull the dent
What is a Uni Spotter / stud welder?
200
This tool is used to remove Plastic clips and interior panels
What is pop clip Tool?
300
what is this technician doing wrong?
What is Stirring instead of fold?
What is cardboard?
300
You are done washing a car what should you do before drying it
What is inspect it for missed spots?
300
This can happen when too much paint is applied to the surface of a Vertical panel.
What is a Run?
300
when repairing a panel this product is used to find low spots in the body filler
What is Guide Coat?
300
Show tool
Diagonal Cutter
400
Body filler must be put on
What is clean substrate?
What is bare metal?
400
this tool is used to remove large amounts of water from the paint surface to assist in drying. Some use just for windows
What is a Water blade?
400
this material protects paint from the weather and driving conditions keeping it shiny.
What is Clear Coat?
400
Can this be repaired?
No
400
12 point, Deep well, 3/8 drive, 12mm
What is a Socket?
500
When sanding body filler down what is the name of the method or pattern used
What is X sanding or cross hatch sanding?
500
What is this tool called?
Spur wheel buffer cleaner
500
This method is used when painting to cover the area without making stripes in the finish.
What is Overlap?
500
after a collision repair a panel does not fit on, what is most likely the reason
improper substructure repair
500
This tool is required to assist in leveling the surface of a body panel after body filler is applied.
What is a sanding block?