Hardware/Tools
Which tool is used to conduct continuity checks?
Laser
Multimeter
Ammeter
Ohmmeter
Multimeter
Which type of corrosion is attachment of two different metals with corrosion product buildup at the joint between the metals?
Exfoliation
Stress
Crevice
Galvalic
Galvanic
Which type of lines are used to indicate distance measured?
Dimension
Center
Extension
Hidden
Dimension
What is the minimum required paygrade to be designated as a Collateral Duty Quality Assurance Representative?
E-5
E-4
E-6
E-7
E-5
What lets intermediate maintenance activity personnel determine if they can repair an individual item based on its SM&R code?
CRIPL
MRIL
AVCAL
ICRL
ICRL
What is a high-strength, blind structural fastener that is used on difficult riveting jobs when access to one side of the work is impossible?
Jo-Bolt
Lock-Bolt
Hex Bolt
Self Locking Bolt
Jo Bolt
Aluminum marine alloys under proper care are resistant to which type of corrosion?
Black Water
Gray Water
Salt Water
Fresh Water
Salt water
01-1B-50
01-509-3
01-25-100
01-1A-25
01-1B-50
A QA stamp may not be reassigned to another inspector within a period of how many months?
a. 6
b. 12
c. 9
d. 3
d. 3
Material Control codes D, E, G, H, Q, or what else identify mandatory turn-in repairable that must be turned in to the local supply department when they become unserviceable?
O
X
Y
Z
X
What nuts are used in applications requiring anchored nuts equally spaced around openings such as access and inspection doors and removable leading edges?
Channel
Plate
Locking
Barrel
Channel
Which type of corrosion is direct surface attach sometimes referred to as?
Uniform etch
Pitting
Scaling
Fretting
Uniform Etch
How many form are lubricants available in?
5
2
4
3
3: fluids, semisolids, and solids.
How many QA objectives are within the NAMP
2
5
7
3
5. Improve the safety of flight and ground operations. Improve the quality, uniformity, and reliability of aircraft and equipment. Improve the quality of maintenance materials, technical data, and process. Improve the skills and consistency in performance of maintenance personnel. Eliminate unnecessary man-hours and material expenditures.
SRS limits the quality of any item in the PEB to a how many-day supply?
45
30
60
15
30
What rivet is in general use throughout aircraft structures and is by far the most widely used rivet, especially in repair work?
1189-T3
2117-T4
5442-T1
1896-T2
2117-T4
Which type of corrosion products will be white, gray, or black and may appear as a paste when wet, or a hard, adherent film or easily crumbled deposits when dry?
Nickel
Titanium
Magnesium
Aluminum
Aluminum
The main hydraulic components of the nosewheel steering system are the nosewheel steering power unit and what else?
Cutout valve
Selector valve
Control valve
Pressure valve
Selector Valve
The QA supervisor is the Maintenance Department Safety Manager. Responsibilities are address in OPNAVINST 5100.23 for ashore activities and which publication for afloat activities?
OPNAVIST 4790.2C
OPNAVINST 3300.6
OPNAVINST 8000.16
OPNAVINST 5100.19
OPNAVINST 5100.19
What process components turned in to the ASD/SSC to determine the capability of the intermediate maintenance activity to check/test or repair the item?
CCSU
ASD/SSC
AMSU
LRCA
AMSU (Aeronautical Material Screening Unit). AMSU makes this determination by using the ICRL
When a hose is installed between two ducts sections, the gap between the duct ends should be a minimum of 1/8 of an inch and a maximum of what?
3/4"
1"
1 3/4"
1 1/2"
3/4"
Which type of corrosion products are blue or blue-green and are also easily detected?
Steel
Magnesium
Aluminum
Copper
Copper
When the rudder pedals are moved, what generates an electrical signal proportional to the amount of rudder pedal deflection?
Command potentiometer
Nosewheel Steering Solenoid Selector Valve
Steering Amplifier
Feedback Potentiometer
What provides Configuration Management Auto Log Set Aeronautical Equipment Service Record equipment identification, monthly compilation of significant flight operational data, usage parameters, and accumulative usage data throughout the service life of the Equipment
MRR
EOR
FAR
SRR
EOR (Equipment Operating Records)
What provides the support equipment controlling authority (SECA) with on-line visibility of source, allowance, inventory, and rework data to aid in inventory control?
COMFAIR
SERMIS
AVCAL
IMRL
SERMIS (Support Equipment Resources Management Information System)