Welding
Oxygen and acetylene cylinders are made of
. Steel.
The general rule for finding the proper rivet diameter is
three times the thickness sheet of the materials to be joined.
Which numeric designation rivet for a Universal Head ?
MS20470
AN470
Shallow scratches in sheet metal may be repaired by
Burnishing
ATA for Flight Controls
2700
A welding torch backfire may be caused by
Loose tip
ATA for Stabilizers
5500
Most popular rivets heads markings used in aircraft construction have
Dimples.
Unless otherwise specified, the radius of a bend is the
inside radius of the metal being formed.
The dimensions of an MS20430AD-4-8 rivet are
1/8 inch in diameter and 1/2 inch long.
What purpose does flux serve in welding aluminum?
Minimizes or prevents oxidation.
MS20426AD-6-5 indicates a countersunk rivet, which has
overall length of 5/16 inch.
3/16 Diameter
Under certain conditions, type A rivets are not used because of their
Low strength Characteristics
Set Back Formula
K ( R + T )
The purpose of a joggle is to
Allow clearance for a sheet or an extrusion.
When drilling stainless steel, the drill used should have an included angle of ? .....and what speed ?
118-135° and turn at a low speed
Why is it necessary to use flux in all silver soldering operations?
To chemically clean the base metal of oxide film.
prevent oxidation
Which of the following need NOT be considered when determining minimum rivet spacing?
Rivet length.
The primary alloying agent of 2024-T3 is indicated by the number
2
Why is DD rivet is heat treated before used
soften to facilitate riveting
What method of repair is recommended for a steel tube longeron dented at a cluster?
Welded patch plate
ATA for Fuselage
5300
ATA for Nacelles
5400
Bend Allowance Formula
(.0078T) + (.01743R) N
ATA for Windows
5600