Spacing
This is the average amount of total maxillary leeway space.
What is 1.8 mm
After this age, an ectopic first molar will likely not self correct.
What is age 7?
Reverse pull headgear can provide movement of maxillary molars up to ____ mm per year.
What is 3 mm
This method of sterilization requires 160 degrees C (320 degrees F) for 2 hours OR 170 degrees C (340 degrees F) for 1 hour.
This is the compression rate for adults in CPR.
What is 100 compressions/minute.
This is the average amount of mandibular leeway space.
What is 3.4 mm?
This percentage of the population has a maxillary permanent canine impaction.
What is 1-2%
You would expect to see movement of maxillary molars in this direction with reverse pull headgear.
What is forward or mesial?
This method of sterilization requires a temperature of 121 degrees C (250 degrees F). Pressure 15 psi. Cycle time 15-20 min.
What is steam autoclave?
This is the 4-2-1 rule. (1st 10 kg x 4ml
2nd 10kg x 2ml
Remaining kg x 1ml each)
What is rehydration for replacement fluids?
This is the maximum amount of crowding for primary canine disking to be indicated.
What is 3-4 mm?
This gender has maxillary canine impaction most commonly.
What is female?
Facemask has this effect on lower facial height.
What is increase lower facial height?
This method of sterilization requires temperature 375 degrees F. Cycle time: 12 min for wrapped and 6 min for unwrapped.
What is rapid heat transfer?
The use of further nitroglycerin is contraindicated when the systolic pressure is less than this.
What is 90 mmHg?
This is the amount of crowding of lower incisors where extraction of primary canines is indicated.
What is 4mm?
What is 1 year follow up?
This facial dimension shows the least amount of change of any facial dimension.
What is width.
This method of sterilization requires 131 degrees C (270 degrees F) and 20 psi for 30 min.
What is unsaturated chemical vapor?
If you have a blood pressure cuff that is too small you will get an erroneous reading that is...
What is too high?
How much space from incisor crowding is relieved by placement of a LLHA?
What is 2-4 mm?
This is the type of occlusion you would see in Apert Syndrome.
What is Class II?
This is the most common: cleft lip, cleft palate or combined.
What is combined?
This method of sterilization requires room temperature (25 degrees C, 75 degrees F), takes 10-16 hours.
What is ethylene oxide?
Anaphylaxis is an overwhelming immediate systemic reaction to this immunoglobulin.
What is IgE?