Drywall
Screws installed around the perimeter of the drywall should be no closer than _____________________˝ to the edge of the sheet.
3/8ths
Name of theorem to achieve square
Pythagorean theorem
Drywallers work in what fractions of an inch
1/8ths
A(n) _____ plan shows the arrangement of walls, partitions, columns, doors, windows, stairwells, elevator shafts, and other interior system features on a given floor.
Floor Plan
Starting your drywall from the top typically means your ceiling is what material?
Drywall Ceiling
Proper stud installation should have the __________ side, or soft side of the stud facing the direction from where the layout was pulled.
Open
Drywall will typically be calculated using the square footage of the _____ of the walls and ceilings.
Area
A line that intersects with another line to form a 90° angle is called a _____ line.
Perpendicular
Which type of drywall is installed when radiation/X-ray shielding is required?
Lead backed gypsum board
Name of soffit in which its holding power comes from the drywall sheet
Unbraced Soffit
Tool used to smooth out the edges after a cut on drywall
Rasp
The location at which the layout starts is commonly referred to as the _____.
Point of Beginning
Type of screw used in commercial steel framing to fasten the drywall
Type S
_____ provide(s) additional support for attaching finish fixtures such as handicap grab bars, cabinets, or mirrors.
Backing
The rough opening for KD frames is door size plus _____ per jamb.
1"
_____ is the measurement from the upper surface of the finish flooring material to the elevation of the feature being dimensioned.
Above Finish Floor
Double-layer drywall installation is used in what TWO applications
Sound and Fire walls
Swinging two arcs from the control line is one way of establishing a(n) _____________________ line.
Parallel
how would you attach a panel to a sound proof wall?
Adhesives
A(n) _____ is a plan view that is shown looking up instead of down.
Reflected Ceiling Plan