Hammers
Removes heavy damage and restores shape
What is a Body Hammer
This is another name for a dolly
What is a block
A low spot is when metal is pushed:
Inward
The purpose of body filler
To fill imperfections to create a smooth surface
Are you supposed to use cardboard as a mixing board for body filler?
NO!
Type of hammer that can move larger areas of metal
What is a flat-face hammer
The four main types of dollies (half credit if you can only name two)
Heel, Toe, General purpose, Spoon
A high spot is when metal is pushed:
Outward
Name two things that must be removed before applying filler
Dirt, Grease, Wax, Loose paint, Rust, Silicone, Contaminants
Should you knead the cream hardener before use?
YES!
Type of hammer that allows for concentrated force in a specific area
What is a pick hammer
Hammer on dolly
The dolly is directly behind the area being struck
This is considered contamination in the metal itself
The mixing ratio for body filler
Golf ball sized resin to 3/4in ribbon of hardener
"You can fill a ________ spot, but can't fill a _________ spot"
Low spot, High spot
This can happen if you hit two pieces of case hardened steel together
Hammer off dolly
The hammer and dolly are not directly opposite from each other
This happens when metal is stretched
What is an Oil Can (pops back and forth)
Another name for hardener
What is Catalyst
False
This type of hammer is rarely used in the industry today
What is a door skin hammer
Supports the metal and shapes the panel
List three of the 5 ways metal can be moved
Bent, Stretched, Compressed, Raised, Lowered
How can temperature affect the curing rate of body filler?
High temp = faster curing
Low Temp = slower curing
This should be done using a DA (pneumatic orbital sander) prior to applying body filler
Feather-edge