The FINN HYDROSEEDING slurry provides an ideal growth environment by:
(give 3 of 6 answers)
Creating favorable soil conditions, Providing shade, Retaining nutrients, Ideal temperature (shade during hot day, blanket during cool nights) Retaining moisture, inhibiting weeds
100
What is the smallest bark blower FINN makes?
BB302
100
What is important about "independent clutch control" on the FINN Straw Blowers?
Safety-the blower does not start when the engine is turned on.
Minimizes engine wear.
Only engages full engine power when needed.
100
If a customer does on overage of a .25 acre of seeding at a time, what model of FINN Hydroseeder would you recommend?
T90 or T120
100
Where is the serial # located on a FINN machine?
front right side of the equipment-on the frame.
*On some bark blowers it is under the control panel.
200
What are the benefits of hydroseeding?
(give 5 of 10 answers)
Cost effective, Complete coverage, Quality results, Erosion control, Versatility, Health & safety, Speed of application, Water retention, Labor savings, Speed of germination
200
Approximately how much material can you save using a FINN Bark Blower?
25%
200
What is the approximate discharge distance of a FINN B40 Straw Blower?
40'
200
If a customer wants to stay under the 10,000 pound weight limit due to DOT regulations, what 3 models of FINN Hydroseeders will meet this requirement?
T30, T60, &T75
200
What can happen when you over agitate your slurry during hydroseeding spraying?
Cavitation in the pump, foaming problems.
300
What does FINN call its Clutch/Pump combination?
Clump
300
What is the function of the "airlock" in the FINN Bark Blower?
meters material drop into the air stream, and produces even mulch distribution.
300
Which model of FINN Straw Blowers had a hydraulically driven power feed?
B260
300
What are two models that FINN offers that are specific to landfills?
LF90 & LF120
300
Scenario: On a B40-the engine is running, clutch is engaged, the fan is spinning, yet no straw comes out. Some straw debris is blowing back out of the feed entrance tray. What is the most likely problem with the machine?
Blockage in the neck, between chamber and spout.
400
What 2 models of FINN hydroseeders come in a "LF" (land fill) option?
T90 & T120
400
Which FINN bark blower(s) rides on a single axle trailer?
none
400
What is the purpose of the "flail chains" inside the straw blower?
Separates the straw, instead of cutting it.
*uniform length, stable straw matrix, natural interlocking to minimize dust
400
!!Daily Double!!
How much would you like to wager?
What is the name of FINN's sister company in the bark blowing division?
400
What is the first step that you should do on a FINN Hydroseeder to avoid plugging or clogging up the machine?
Purge the lines.
500
What 3 models of FINN hydroseeders are available in TITAN model?
T280, T330, & T400
500
Why would you sell the "dust suppression option" to a Bark Blower customer?
To keep the dust down during dusty/dry applications.
500
Approximately how many tons of straw can the FINN B70 Straw Blower blow per hour?
7 tons
500
Scenario: A contractor tells you he needs to cover 3 acres of ground with straw. What FINN product would you suggest he rents?
B40 is sufficient, &B70 is acceptable as well. *Two acres will require 200-300 bales of straw, and this could be done in less that a day with the B40.
500
What would cause the "air lock" in a FINN Bark Blower to auto-reverse?
Feed rate too high/floor speed to fast.
Foreign object stuck.
Knifes dull.