WATER
The fixture in the plant that uses the most water.
A. Cooling Baths
B. Chiller
C. Presses
D. Barbe System
What is A Cooling Baths?
The Michelin standard A/C setting in the summer
A. 72 F
B. 79 F
C. 78 F
D 75 F
What is B 79 degrees?
The Michelin standard heat setting for Winter
A. 65F
B. 68F
C. 70F
D.72F
What is A 65 degrees?
The name of the machine that generate compressed air
A. Air Dryer
B. RTO
C. Air Compressor
D. MAU
What is C Air Compressor?
The biggest consumer of indoor water usage in your home
A. Toilet
B. Shower
C. Washer
D. Dishwasher
What is A Toilet?
The number of Blach HQ water coolers in the plant.
A. 2
B. 3
C. 5
D. 4
What is C 5?
The number of Big A** fans we have in Curing
A. 6
B. 5
C. 4
D. 3
What is A 6?
The number of dock doors we have on-site used for scrap, shipping and receiving
A. 11
B. 8
C. 12
D. 15
What is C 12?
The plant air pressure setting
A. 110 psi
B. 120 psi
C. 115 psi
D. 125 psi
What is B 120 psi?
The amount of water (in gallons) used in a single toilet flush
A. .5-1 gal
B. 1.5-2 gal
C 2.5-3 gal
D. 1.0-1.5 gal
What is D 1.0-1.5 gal?
The total number of refrigerators in the break rooms at GEO
A. 5
B. 3
C. 4
D. 2
What is B 3?
The number of Blue roll-up doors at GEO
A. 2
B. 3
C. 4
D. 5
What is C 4?
The maximum amount of time a curing press can remain open before a reheat is required
A. 10
B. 15
C. 20
D. 25
What is C 20 minutes?
The device used for cleaning compressed air
A. Trim Post
B. Cementer
C. Air Dryer
D. Chiller
What is an C air dryer?
The average household heat setting during the winter when you are at home.
A. 68 F
B. 66 F
C. 70 F
D. 72F
What is A 68 degrees?
The amount of water (in gallons) that the extruder cooling baths can hold
A. 1,000-2,000 gallons
B. 2,000-3,000 gallons
C. 3,000-4,000 gallons
D. 4,000-5,000 gallons
What is B 2,000-3,000 gallons?
The cost of 1 kWh for GEO
A. $.07
B. $.05
C. $.06
D. $.10
What is A 0.07 cents?
The Units that heat air for the Curing department
A. MAU- Make Up Air Units(No AC)
B. RTU- Roof Top Units(A/C and Heat)
C. Boiler- Heat Only
D. Chiller- Cooling only
What are A MAU?
The plant's average air leakage percentage
A. 27%
B. 29%
C. 31%
D. 33%
What is B 29%?
The average temperature setting for your home in the summer.
A. 72 F
B. 74 F
C. 76 F
D 78 F
What is D 78 F?
The Must-Win Battle 5 water consumption goal\
A. 2.4%
B. 3.4%
C. 4.4%
D 5.4%
What is D 5.4% reduction?
The Dept in the plant that has heating and cooling set points based on Quality Requirements
A. Curing
B. Prep
C. Finishing
What is B Prep?
The biggest consumer of natural gas in the plant
A. RTO
B. Boiler
C. Presses
D. Extruders
What is the B Boiler?
The area in the plant with the biggest demand for compressed air at any given moment.
A. CBL Area
B. Trim Post
C. Cementers
D. Splice
What is D Splice?
The amount (in kWh) that the average home uses annually
A. 8,000-9,000 kwh
B. 9,000-10,000 kwh
C. 10,000-11,000
D. 11,000-12,000 kwh
What is C 10,000-11,000 kWh?