Electrical Subsystem
Containment Vessel
Waste Transfer Subsystem
Reagent Supply Subsystem
This and That
100

Monitors outer skin temperature.

What is the Outer Skin Temperature IR Sensor?

100

Connects the supply hose to Q19 for the door leak check and allows helium to be introduced into vessel.

What is the helium fill adapter?

100

Liquid process waste drum for neutralent.

What is waste drum 1?

100
Valve 27 "CLOSED" light.
What is the only light NOT to illuminate when the Lamp Test button is pushed?
100
Air-operated double diaphragm pumps used to transfer liquids to supply tanks.
What are the Reagent and Water Source Pumps?
200
Contains the connections for electrical power from Trailer.
What is the Reagent Supply Subsystem Platform Power Panel?
200
4.8 lbs. TNT (equivalent) rating with an 160-gallon capacity.
What is the P2 Containment Vessel?
200
Alternate disposable drain subsystem.
What is the Lewisite Kit?
200
Provides operator control of liquids and gases throughout system.
What is the Reagent Supply Panel?
200
Motor is at the 12 o'clock position.
What is the P2 Rotary Agitation Subsystem?
300
Vessel Control Panel, Rear of Clamp Hanger Frame above Hydraulic Nut Pump and the Hose Docking Station.
Where are the Process Shutdown Buttons located on the P2 Series EDS's?
300
Transmits vessel internal pressure.
What is the pressure transducer?
300
Provides overpressure relief for liquid waste drums 1 and 1A.
What are the burst disks?
300
Is in waste piping stream and closes to stop drain if an E-stop is activated or a burst disc fails.
What is Valve 27?
300
Controls air supply to trailer and closes when an e-stop is pushed or a burst disk fails.
What is Valve 51?
400
Halt, Fill, Home, Rotate and Drain.
What are the five vessel positions for the P2?
400
Safely, reliably and conveniently collects a 15-milliliter liquid sample of vessel contents for laboratory analysis.
What is the Liquid Sample Adapter (LSA)?
400
Captures vapors from waste drums.
What is the carbon filter?
400
Air operated double diaphragm pump that pumps liquids from the secondary containment pans into a container.
What is the Pan pump?
400
Main interface between operator and lifting device.
What is the pendent handle?
500
Vessel Control Panel and Reagent Supply Panel.
Where can you monitor vessel pressure?
500
Replacement for LSA if required.
What is the stainless steel sample bottle?
500
Trailer and reagent platform sump waste is evacuated here.
What is Pan waste Drum 3?
500
Supplies air to the air panel.
What is Valve 52?
500
Tests continuity of detonator cables and connections and houses the safety interlock connector.
What is the Interface Panel?
M
e
n
u