What is 200lbs?
This is the color that we are in for assured grounding this month?
What is green?
This is the classification of fire extinguisher that fights electrical related fires.
What is class C?
This means.
What is double insulated?
This is the new PPC Safety Slogan/Tagline.
What is 15 feet?
This is the voltage OSHA and NFPA 70e states where a shock hazard starts and work is considered energized.
What is 50 volts?
Holes or floor openings over this diameter need to be covered, secured, and marked as hole.
What is 2inches?
According to Pieper Policy, this tool can only be operated by a JW with a faceshield and JHA completed.
What is a circular saw?
If you are removing and working above ceiling grid, this is the 2 additional pieces of PPE that should be worn.
What is foam-lined safety glasses and sleeves?
What is 1,800lbs?
These are the two risk assessments that must be completed before working on or around energized parts.
What is Shock and Arc Flash?
According to OSHA, this is the only type of respirator that can be worn voluntarily if Appendix D is acknowledged.
What is N95?
This is the tool to establish an "electrically safe working condition" after LOTO is applied.
What is a multimeter?
This is the person on site who is capable of identifying existing and potential hazards and has the authority to take prompt corrective action.
What is a competent person?
What is Class 2 or Leading Edge SRL?
What is 3feet, 6inches?
Confined spaces are spaces where limited means of egress, able to bodily enter, and this condition is met.
What is not designed for human occupancy?
This is missing from the tool in this situation. 
What is a tool tether?
This means
What is an oxidizer?
What is 18 feet?
This is the amount of energy that will cause a second degree burn or where 70e considers to be an arc flash hazard (answer in cal/cm2).
What is 1.2cal/cm2?
This is the one type of cave-in protection that is not acceptable for Class C trenches or excavations.
What is benching?
This is the Table in the Silica Program that provides exposure control methods for silica. (Table _)
The OSHA Construction is standard is this part number.
What is 1926?