Tools
What tool is used to hold materials tightly together while glue dries or while fastening?
clamp
What should be worn in the shop during working days?
Safety glasses
What type of drawing shows the layout of rooms as if you are looking straight down from above?
floor plan
1/4 + 3/8
5/8
What type of material is commonly used for framing walls in residential construction?
lumber (wood)
Phillips, Slotted, Torx, or Square are the heads found on this tool.
screwdriver
How many fire extinguishers are in the entire shop?
5
How long was our shop?
60'
This measurement is the distance around the outside of a shape.
Perimeter
If a stick of lumber measures 1.5" x 7.25", what is its nominal size?
2x8
What tool is used to check if a surface is perfectly horizontal or vertical?
level
During Fire alarm, where does this class report to?
ROTC pad
What is the term for the measurement used on blueprints that shows how real-life distance compares to the drawing?
scale
6' 3" + 4' 10"
11' 1"
A standard 2x4 piece of lumber does not actually measure 2 inches by 4 inches. What are its actual dimensions?
1.5 inches by 3.5 inches
What tool is commonly used to mark a 90-degree angle, and can also help find many other degrees?
speed square
What does PPE stand for?
Personal Protective Equipment
What were the dimensions of my office?
10X12
A board is 12 feet long. If you cut it into pieces that are each 3 feet long, how many pieces will you have?
4 pieces
What adhesive is commonly used to bond two pieces of wood together and becomes stronger as it dries?
wood glue
Which portable tool is best to cut in a straight line?
Circular Saw
Before using any power tool, what is the first thing you should check to ensure it is safe to operate?
inspecting the tool for damage (cords, guards, or proper working condition)
What type of drawing shows the layout of a building on a property, including the house, driveway, and property lines?
site plan
A rectangular room is 12 feet wide and 15 feet long. What is the total square footage of the floor?
180 square feet
A 1x12 board also has smaller actual dimensions than its name suggests. What are the actual dimensions of a 1x12?
What is ¾ inch by 11¼ inches