Mechanized Equipment
Who is responsible for performing equipment inspections on site?A) The superintendent in charge of the job site.
A) The rental company mechanic.
B) The Safety Manager.
C) The operator.
C) The operator.
Which document must be available on-site for each hazardous substance?
A) SMDS
B) Incident Report
C) Toolbox Talk Record
D) SDS
D) SDS
How often must fire extinguishers be inspected by trained personnel to ensure they are ready for use?
A) Once a year only
B) Monthly and before each use
C) Only after an incident
D) Weekly by any worker
B) Monthly and before each use
What is the main purpose of an incident report?
A) To assign blame
B) To document what happened and prevent future incidents
C) To report only injuries
D) To discipline employees
B) To document what happened and prevent future incidents
What is the OSHA Permissible Exposure Limit (PEL) for respirable crystalline silica?
A) 100 µg/m³
B) 75 µg/m³
C) 50 µg/m³
D) 25 µg/m³
C) 50 µg/m³
Who is responsible for submitting the equipment inspection in Raken?
A) GC Superintendent
B) Assistant Superintendent
C) Rolman
D) Superintendent
D) Superintendent
Which document is primarily used to track and summarize all recordable injuries and illnesses throughout the year?
A) OSHA 300A
B) OSHA 300 Log
C) OSHA 3000
D) OSHA 301 Form
D) OSHA 300A
When must the daily safety inspection be performed by the competent person and documented in Raken?
A) Weekly at the end of the week
B) Only when the Safety Manager is on site
C) Daily
D) After an incident occurs
C) Daily
When should an incident report be completed?
A) At the end of the week
B) Only if OSHA requests it
C) Immediately or as soon as possible after the incident
D) Only for serious injuries
C) Immediately or as soon as possible after the incident
What is the minimum extension required above a landing for a portable ladder?
A) 2 feet
B) 3 feet
C) 4 feet
D) 5 feet
B) 3 feet
Does the operator need an operator’s manual to operate equipment on site?
A) Yes, because it is required.
B) The operator can do everything with training.
C) The operator does not need a manual to operate equipment on site.
D) Yes, the operator needs a manual to operate equipment.
D) Yes, the operator needs a manual to operate equipment.
What is the date range during which the company must make the OSHA 300A form publicly available?
A) Between January 2 and April 28
B) Between January 1 and April 28
C) Between January 9 and April 30
D) Between February 1 and April 30
D) Between February 1 and April 30
What is the minimum required flushing time when using an emergency eyewash station after exposure to a hazardous substance?
A) 5 minutes
B) 10 minutes
C) 15 minutes
D) Until discomfort stops
C) 15 minutes
Which of the following incidents must be reported?
A) Only recordable injuries
B) Only incidents with lost time
C) All incidents, including near misses and property damage
D) Only incidents involving equipment
C) All incidents, including near misses and property damage
At what height is fall protection required in construction according to Occupational Safety and Health Administration?
A) 4 feet
B) 5 feet
C) 6 feet and 10 feet
D) 6 feet
C) 6 feet and 10 feet
Can I lift anything with a forklift by placing rigging equipment on the forks?
A) Free rigging is not a good practice.
B) Yes, anybody can do it.
C) The forks are designed to lift—why not?
A) Free rigging is not a good practice.
What is the required timeframe to close out safety report items when they are NOT classified as critical issues?
A) 120 hours
B) 168 hours
C) 72 hours
D) 96 hours
B) 168 hours
When must an excavation inspection be performed by a competent person?
A) Only before work begins
B) Weekly and after rain
C) Daily, before the start of work, and after any hazard-increasing event (like rain or vibration)
D) Only after a collapse or incident
C) Daily, before the start of work, and after any hazard-increasing event (like rain or vibration)
A subcontractor employee is involved in a minor incident with no injury, but it exposed a serious unsafe condition. The subcontractor fails to initiate an incident report. According to company policy and best practices, who ultimately holds responsibility for ensuring the incident is properly documented and submitted?
A) Only the injured employee, since they were directly involved
B) The subcontractor’s safety officer exclusively, since it is their employee
C) The supervisor/competent person in charge of the work area, including oversight responsibility for subcontractors
D) Any witness, since they observed the unsafe condition
C) The supervisor/competent person in charge of the work area, including oversight responsibility for subcontractors
Which condition alone makes a space a permit-required confined space?
A) Limited entry and exit
B) Not designed for continuous occupancy
C) Potential for a hazardous atmosphere
D) Large enough to enter
C) Potential for a hazardous atmosphere
In the case of a potential incident how is responsible to stop the crane.
A) Anybody
B) GC
C) The competent Person
D) The owner of the project
E) Jesus
A) Anybody
Which of the following documents are used for pre-task hazard identification?
A) Job Safety Analysis (JSA)
B) Pre-Task Plan (PTP)
C) Job Hazard Analysis (JHA)
D) Activity Hazard Analysis (AHA)
E)
E) All of the above
What color tape should be used for electrical tool inspections during the month of August?
A) Blue and red
B) Red
C) Red and Yellow
D) Yellow and red
C) Red and Yellow
When must an employer report a work-related incident to Occupational Safety and Health Administration (OSHA) involving a fatality or a serious injury such as hospitalization?
A) Fatality within 24 hours; hospitalization within 48 hours
B) Fatality within 8 hours; hospitalization within 24 hours
C) Fatality within 12 hours; hospitalization within 72 hours
D) Immediately call OSHA
B) Fatality within 8 hours; hospitalization within 24 hours
According to OSHA Table T-1, what is the minimum clearance distance required from a 50 kV power line?
A) 10 ft
B) 15 ft
C) 20 ft
D) 25 ft
A) 10 ft