Forklift safety
This part of the forklift keeps the truck balanced by offsetting the weight of the load on the forks
What is the counterweight
This is the first thing you should do if you discover a fire in a building.
What is activate the fire alarm
This is the designated area employees should use when walking through a TSDF to avoid forklifts, trucks, and heavy equipment.
What are marked pedestrian walkways
During a thunderstorm, employees working outside at a TSDF should move to this type of location for protection.
What is a designated indoor shelter or safe building
This PPE category is determined by the level of hazard present and the amount of protection needed from chemicals, heat, or other workplace exposures.
What is the PPE selection process based on a hazard assessment
The imaginary triangular area formed by the two front wheels and the pivot point of the rear axle that keeps a forklift stable.
What is the stability triangle
This acronym reminds you of the four stages of using a portable fire extinguisher.
What is PASS (Pull, Aim, Squeeze, Sweep)
Before stepping into a loading area where vehicles may be moving, employees should make sure they do this with equipment operators.
What is make eye contact and receive acknowledgment from the operator
This weather condition can create slippery walking surfaces, increase vehicle stopping distances, and make loading areas hazardous.
What is ice or freezing conditions
Before using a respirator, employees must complete this evaluation to ensure the respirator forms a proper seal on their face.
What is a respirator fit test
Raising a load while the forklift is moving increases the risk of this dangerous event.
What is a tip-over
Fires involving energized electrical equipment are classified as this type of fire.
What is a Class C fire
This safety rule requires pedestrians to stay a safe distance away from operating forklifts, trailers, and moving vehicles.
What is maintain a safe separation distance?
During hot weather operations, employees should watch for signs of this heat-related illness caused by the body overheating.
What is heat exhaustion or heat stress
This type of glove selection is critical when handling hazardous chemicals because not all glove materials protect against every chemical.
What is chemical compatibility
When driving down a ramp with a loaded forklift, the load should always face this direction.
What is uphill
This fire extinguisher rating indicates the extinguisher is safe and effective for ordinary combustibles, flammable liquids, and energized electrical equipment.
What is an ABC-rated fire extinguisher
In a TSDF yard, this type of clothing helps operators see employees while working around trucks and equipment.
What is high-visibility PPE (such as a reflective vest)
Strong winds at a TSDF can create this hazard by causing unsecured containers, materials, or debris to move unexpectedly.
What is a struck-by hazard
PPE that is damaged, contaminated, or no longer provides protection must be handled according to this process before being returned to service.
What is inspection, cleaning/decontamination, repair, or replacement
The maximum weight a forklift can safely lift depends not only on the load’s weight, but also on this measurement from the face of the forks.
What is the load center
Before using a portable fire extinguisher, you should first make sure you have this behind you so you can safely leave if the fire grows.
What is a clear escape route (or an unobstructed exit)
When walking near heavy equipment, employees should never assume the operator can see them because of this common hazard.
What are blind spots
Before severe weather arrives, TSDF employees should complete this action to prevent damage, spills, and unsafe conditions in outdoor work areas.
What is secure equipment, inspect work areas, and follow the site severe weather plan?
In a TSDF environment, this document provides information about chemical hazards, required PPE, and safe handling precautions for materials being managed.
What is the Safety Data Sheet (SDS)