Machine Safety
An operator knows a safety problem exists with a machine, the operator then...
What is notify a supervisor immediately?
Which of the following is a common cause of workplace death?
Falls
Overexertion
Spilling Chemicals on you body
Failure to wear Personal Protective Equipment
What are falls?
A flood and example of a(n)
What is an environmental emergency?
Grease is made from liquid lubricant with this added to make it semi-solid.
What are thickeners?
Where can you find safe handling procedures of chemicals?
What is the SDS?
What three elements must be present for a fire to occure?
What is Fuel, Oxygen, and Heat
The three main components for a lockout/tagout system.
What is the Lock, Lockout Hasp, and Tag?
The PPE used to prevent a puncture wound to your foot
What are safety shoes?
If an employee discovers a fire, their first response should be to?
What is sound the fire alarm?
The GHS hazardous material classification systems used to identify the danger of a material
What are pictograms?
Why should you store chemical containers upright?
What is so labels can be easily read?
The type, or class, of fire determines the method used to extinguish it. In the United States there are the..
What is four classes of fire?
An interlock for an operator to prevent them from being in harm's way while the machine is in operation.
What is a restraint interlock?
Employers are required to create a PPE program based on the physical and ______ hazards present in the workplace.
What is Health?
If a workplace accident occurs, who should be called to aid the injured person?
Who is the first responder?
What number does the NFPA system use to represent the most extreme hazards?
What is the number 4?
Before shipping a hazardous material, what information do you need to review, that provides directions for packaging, labels, UN ID and required paperwork for shipment?
What is the DOT Hazardous Material Table?
Companies of 50 or more employees must maintain a minimum corridor width of
What is 44 in. (112 cm)
In Step 5 of an Electrical Lockout/Tagout procedure, before starting work on locked out equipment,
What is test the equipment to verify all dangerous forms of energy are removed?
The National Safety Council defines an accident as an occurrence in a sequence of events that produces.
What is an unintended injury, ill health, or property damage?
When first arriving on the scene of an accident, what three pieces of information should you gather?
What is,
Evaluate the Scene
Check with Bystanders
Keep yourself Safe
The two approved signal words?
What is Warning and Danger?
The number of classifications in the DOT hazardous material identification system.
What are 9 classifications?
Class 1: Explosives
Class 2: Compressed Gases
Class 3: Flammable Liquids
Class 4: Flammable Solids
Class 5: Oxidizers
Class 6: Toxic or Infectious
Class 7: Radioactive
Class 8: Corrosive
Class 9: Miscellaneous
OTHER: While technically the Environmental impact of Hazard Placard does not have a specific class number, it is used when a chemical can harm maring life
What is the size area (in sq ft.) that the fire extinguisher can put out?
A lockout plug is...
What is completely encloses a plug, preventing it from being plugged into the wall outlet?
What is the word laser an acronym for?
What is Light Amplification by Stimulated Emission of Radiation?
A caustic substances are
What are substances capable of burning, corroding, or destroying by chemical action?
Acids and bases are common caustics
When referring to SDS, TLV stand for.
What is threshold limit value?
The six colors the DOT uses to identify types of materials.
What is:
Orange: Explosives
Green: Non-Flammable Gas
Red: Flammable
Blue: Water Reactive
Yellow: Oxidizer
White: Health Hazard
The four fire classifications are.
Class B: Flammable and Combustible Liquids
Class C: Energized Electrical
Class D: Combustible Metals