ELEVATED WORK AREAS
A non-flammable canvas, or other similar material, and barricades shall be used to prevent _____________ from falling on lower levels.
What is welding or cutting slag
Power tools shall be _______________ while repairs are being made or attachments are being installed or removed.
What is: disconnected from the power source
Once work is completed, who authorizes the removal of Danger Tags per the Fossil Tagging Clearance Record?
Who is the: Control Authority
What type of material is "Type A" fire extinguisher used for?
What is paper and wood. Anything that burns and leaves ashes. A is for ashes.
In March of ____ Stone & Webster began construction of Louisiana Steam Products Company on 27 acres along the Mississippi River north of Baton Rouge.
What is: 1928
Toe-boards shall be used in all elevated work areas _______ feet high if there is a danger of tools or materials falling off.
What is 10 feet high.
The only tools permitted for cutting tie wraps, cable ties, wire ties, etc. are ___________________?
What is : hinged-type cutters similar to cutting pliers
True or False - Contractor Identification Tags (CIT) shall be removed at the end of an Affected Persons daily work period.
What is : True
What type of fire is a "C Type" fire extinguisher used for?
What is electrical.
In 1991 ____ unit underwent an upgrade which increased the output to 129MW but did not increase the capacity of the HRSG.
What is: 4-A
A safety harness with lifeline attached shall be worn while performing work from the turbine runner blades when __________ are not used.
What is a scaffold.
A powder-actuated tool should not function until it is pressed or pushed against the work surface with a minimum force of _____ greater than the total weight of the tool.
What is: (B)5 pounds.
Where do contractors place Contractor Identification Tags (CIT)?
What is: On the Contractor Board under the applicable hasp
What are the 3 things that make up the "Fire Triangle". The 3 things you need for a fire to occur.
What is Heat, Fuel, and oxygen.
In 1953 1A, 2A, and 3A boilers were installed along with 2A and 3A STG’s. This represented a further leap in technology as these boilers and turbines operated at _______ psi
What is: 1500