Heavy Construction
This waterfront facility is designed to protect the shoreline from erosion.
What is Seawall?
This is the permeability rating for vapor barrier material.
What is 1 or less?
This is the adjustable range controls temperature for primary water heaters.
What is 90 to 160 degrees Fahrenheit (32 to 71 degrees Celsius)?
This is the flame spread rating accordion doors should have.
What is not more than 25?
This type of finishing plaster is blended with lime for increased strength over wood fiber basecoats.
What is Guaging?
This type of pile is driven vertically and used for direct support of vertical loads.
What is Bearing?
This is something you should verify when inspecting loose fill insulation.
What is the insulation bulges past the studs by 1/2 to 1 inch?
This is examples of visual displays.
What is presentation boards, tack boards, building directories, etc?
This is the type of glass that contains ferrous iron admixture that absorbs much of the energy of the sun.
What is heat-absorbing glass?
This is the intervals that metal lath fasteners should be spaced.
What is 6 inch intervals at supports and 9 inch intervals at laps?
This type of bracing is used to provide stability between two timber bridge bents in the direction of the bridge centerline.
What is Longitudinal?
When inspecting common roof rafters this is something you must ensure when nailing roof rafters.
What is nailed into every third parallel ceiling joist?
This is the minimum number of fasteners that should be used to permanently install cases(cabinets) to floors or walls.
What is minimum of 2 anchors for each case?
This is where the label must be permanently affixed on a fire-rated door.
What is on edge of door and on doorframe?
This is the type of grout used in industrial areas for its resistance to acids and weak alkalis.
What is Furan resin grout?
This term is used to refer to two or more piles driven in a row, transverse to the long dimension of a structure and fastened together by capping or bracing.
What is Pile Bent?
When inspecting roof sheathing you must verify that each panel is bearing on this number of rafters or trusses.
What is at least 2 rafters or trusses?
This inspection should be checked on solid-surface countertops.
What is securely joined with stone adhesive and filled level to the quartz surfacing?
This is an inspection point you will check on steel hinged doors.
What is top of exterior door is sealed and flush cap to prevent water entry into doors?
This is the characteristics of ceramic tile to determine its classification.
What is exposure(interior or exterior) and location (walls or floors)?
These components of the substructure of a bridge, are usually 2 feet longer than the width of the roadway or trestle.
What is caps and sills?
This is the roofing term used to describe the incline of a roof expressed as a fraction of the vertical rise to the horizontal distance between outside top plates.
What is Pitch?
This is what the suction inlet should be for a sump pump.
What is between 3 and 6 inches(75 and 150mm) above the sump bottom?
This type of glass is held together with plasticized polyvinyl resin butyl.
What is laminated glass?
This is the moisture content that must be checked while in storage for flooring.
What is 6 and 9 percent?