TC
CMC caught me with my hands in my pockets. What's that website with the uniform regulations?
When not in a pony-tail, what is the maximum length a female's hair may lay while wearing NWU's?
Hair length, when in uniform, may touch, but not fall below a horizontal line level with the lower edge of the back of the collar.
What is the ship's 3M instruction?
LPD26INST4790.1A
I have the second watch of the day? What happens at 1200?
strike 8 bells; must have permission from CDO/CO.
What is the "AIRCRAFT FIREFIGHTING AND
RESCUE MANUAL?"
NAVAIR 00-80R-14
Men's hair shall be no longer than ____ inches in length and ____ inches in bulk
4 inches in length, 2 inches in bulk
How long can a female's nails be while in uniform?
Fingernails shall not exceed 1/4 inch measured from the fingertip.
What is the current Safety Manual? Which section applies to Surface Ship Safety?
OPNAVINST 5100.19F, Section C
What are the six daily 12 O'clock reports?
-Muster
-Cyber
-Fuel and Water
-Boat
-Draft
-Magazine Temperature
During an aircraft casualty, who is a designated trained individual in the vicinity of an incident, who understands the requirements of the emergency, and accepts responsibility for directing all available firefighting assets at the scene?
Scene Leader
1. Sideburns shall not extend below a point level with the middle of the ear.
2. shall be of even width (not flared)
3. shall end with a clean shaven horizontal line.
How long can a female's pony-tail be while in uniform?
3 inches below the lower edge of the collar (shirt/blouse, jacket or coat) while sitting, standing or walking.
What does a single (+) next to a periodicity code on an MRC indicate?
A single plus (+) following the periodicity codeindicates that this procedure is intended to be scheduled and performed by Off-Ship Maintenance Personnel.
ABFC Flores wants to muster ATT on the flight deck. How do I make that announcement?
Muster the Aviation Training Team on the flight deck with Chief Petty Officer Flores.
What is the minimum and maximum number of personnel on a 2 1/2 inch AFFF hose team?
What about 1 1/2 inch hose?
2 1/2 inch AFFF hose: MIN-5; MAX-7
1 1/2 inch AFFF hose: MIN-3; MAX-5
Which belt(s) is/are authorized while wearing coveralls?
Black belt with silver clip and silver buckle
How many barrettes are authorized? What can they look like?
A maximum of two small barrettes, similar to hair color, may be used to secure the hair to the head.
Who is the command’s 3-M System Manager?
Executive Officer
What are the levels of the Use of Force continuum?
1. Presence
2. Verbal Commands
3. Soft Controls
4. Hard Controls
5. Intermediate Weapons
6. Deadly Force
What does PFFPE (fire-fighting suit) stand for?
Proximity Fire Fighting Protective Ensemble
What is the form for a "NO-SHAVE CHIT," and who authorizes it?
NAVPERS 1000/1, Commanding Officer
How many bracelets may be worn while in uniform? What can they look like?
Only one bracelet may be worn while in uniform. Bracelets shall be conservative and in good taste. Eccentric or faddish bracelets are not authorized. Bracelets may consist of natural metals or fabricated materials (i.e., plastic, wood, silicone) and may be gold, silver, copper, grey, tan, brown, black, white, or light pink in color.
What are 5 of the 9 "CHECK NOTE" reasons?
Tag-out S/N
Rescheduled
Out of Periodicity
Lost
Not Applicable
"Performed by"
Tag-out S/N
No Tag-out required
POIC
Not Accomplished
The Admiral will be coming on the ship today! How do I render honors while he is walking on the pier?
1 whistle-attention to Starboard side
1 whistle-Hand Salute
2 whistles-Drop salute
3 whistles-carry on
Name 7 items in the Crash and Salvage "TOOL ROLL"
1. Pliers locking (vice grip) 8-inch — 1
2. Pliers, side cutting 8-inch — 1
3. Pliers 10-inch (slip-joint) — 1
4. Pliers 6-inch (slip-joint) — 1
5. Pliers, long nose (needle nose) — 1
6. Punch, drift (8-inch) — 1
7. Saw, hack frame with 6 spare blades — 1
8. Screwdriver, Phillips #2 — 1
9. Screwdriver, Phillips #3 — 1
10. Screwdriver, flat tip 3/16-inch tip, 6 inches long — 1
11. Screwdriver, flat tip 5/16-inch tip, 10 inches long — 1
12. Wrench, 8-inch adjustable — 1
13. Halligan tool — 1
14. Strap cutter (rescue knife) — 2