Material Handling and Storage
JSA
Crane & Rigging
Forklift Operations
Pressure Testing
100
What is a document that contains information on potential hazards with handling the product?
Material Safety Data Sheet
100
What does JSA stand for?
JOB-SAFETY ANALYSIS
100
1.) What is the first thing you need for a successful lift?
a. A successful rigging plan.
100
2) How many inches off the ground should your forks be while with /without a load while driving?
6 inches
100
What shall require verification that pressure is vented from all bleed ports after a pressure test is completed?
Test procedures
200
At what degree is the flammable flashpoint?
100 degrees
200
How long should a JSA be saved?
1 year
200
2.) Which physical characteristic of a load is most important in rigging the load to ensure stability?
a. Center of gravity.
200
3) How many points of contact are required when entering or exiting a forklift?
3 points
200
Test hoses shall be rated for the maximum test pressure required and labeled with what?
Pressure Rating
300
On controlled products what is good for 3 years?
MSDS Sheet
300
What should be done after the job has been completed?
Once the job has been completed, team members should conduct a post job JSA debriefing in order to review/debrief the job process, document and capture any “lessons learned”. This information should be communicated to others who might be affected
300
3.) The person responsible for directing the lift is called?
a. Competent person.
300
4) How long does an FMC forklift license last before it expires?
2 years
300
3) What is the normal operation pressure percent range of a pressure gauge scale applicable to industry standards?
The operation pressure range shall be confine to 25% - 75% of the pressure gauge.
400
Only properly trained employees handle this type of gas?
Compressed gas
400
Can assigned team members be assigned more than one hazard control?
yes
400
4.) If an operator has any doubt about the safety of a lift, what should he/ she do?
a. Use his authority to stop the job.
400
7) How far from an “important” building should propane tanks be stored?
50ft
400
Pressure containing equipment returned from the field shall always be treated as “____” until proven otherwise.
Pressurized
500
When was the last "Material Handling" manual last revised and by who?
July 9, 2010 by Jeff Ray
500
What do Administrative Controls not do?
Administrative Controls do not guarantee anyone’s safety or account for the human behavioral aspects of safety.
500
5.) Who determines if the load can or cannot be lifted by the crane?
a. The crane operator.
500
8) A fire extinguisher with what type of rating should be stored at propane refueling stations?
40BC rating.
500
What is the FMC Technologies Global Pressure Test Safety Standard?
STD10023517
M
e
n
u