SLIP HAPPENS
That Safety Guy Is TRIPPIN
Gravity Has No Chill
Going Up? Act Right.
That Looked Safer in My Head
100

Which condition is most likely to cause a slip?

A. A clean, dry walkway
B. Oil on the floor
C. A properly secured floor cover
D. A clear stairway  

Correct answer: B. Oil on the floor

100

You find a ladder with a cracked side rail. What should you do?

A. Use it only for short tasks
B. Wrap the crack with tape
C. Tag it and remove it from service
D. Ask someone to hold it  

Correct answer: C. Tag it and remove it from service

100

Under the general industry rule for unprotected platform sides and edges, fall protection is generally required at what height above a lower level?

A. 4 feet
B. 6 feet
C. 8 feet
D. 10 feet

Correct answer: A. 4 feet 


100

Where should you stand while working from a scissor lift?

A. On the midrail
B. On the top rail
C. On a bucket inside the platform
D. On the work platform

Correct answer: D. On the work platform

100

A teammate carries a large box that blocks their view of the stairs. What is the safer choice?

A. Walk faster to reduce time on the stairs
B. Use another material-handling method that preserves visibility and safe stair use
C. Walk backward up the stairs
D. Ask someone to shout directions from the top

Correct answer: B. Use another material-handling method that preserves visibility and safe stair use

200

An extension cord stretched across a walkway creates what hazard?

A. A chemical exposure
B. A noise hazard
C. A trip hazard
D. A heat hazard

Correct answer: C. A trip hazard

200

 Which part of a standard stepladder must not be used as a step?

A. The top cap or top step
B. The first step
C. The second step
D. Any step below your knees

Correct answer: A. The top cap or top step

200

What is the main difference between travel restraint and fall arrest?

A. Both systems allow the same amount of free fall
B. Travel restraint is only used on ladders
C. Fall arrest prevents access to an edge
D. Travel restraint prevents reaching the fall edge; fall arrest stops a fall after it begins

Correct answer: D. Travel restraint prevents reaching the fall edge; fall arrest stops a fall after it begins

200

What is the purpose of the guardrail system on a scissor lift?

A. To provide extra standing height
B. To help prevent workers from falling off the platform
C. To hang heavy materials outside the lift
D. To serve as a ladder

Correct answer: B. To help prevent workers from falling off the platform

200

Someone removes a floor-hole cover and walks away. What is the best response?

A. Assume everyone knows about it
B. Place a small note beside the opening
C. Prevent access and arrange a suitable secured cover or required guarding
D. Leave a broom across the opening  

Correct answer: C. Prevent access and arrange a suitable secured cover or required guarding

300

You discover a spill in a busy walkway. What is the best response?

A. Protect the area and arrange appropriate cleanup
B. Leave it for the next shift
C. Place cardboard over it and continue working
D. Tell teammates to step over it

Correct answer: A. Protect the area and arrange appropriate cleanup

300

You cannot reach your work without leaning far to one side. What should you do?

A. Ask someone to hold your belt
B. Stand on one foot
C. Lean farther while gripping the ladder
D. Climb down and reposition the ladder or select better access equipment

Correct answer: D. Climb down and reposition the ladder or select better access equipment

300

Which point should you connect your fall protection equipment to?

A. Any nearby handrail
B. An anchorage evaluated and approved for the intended fall protection use
C. Any lifting eye that looks strong
D. The closest pipe


Correct answer: B. An anchorage evaluated and approved for the intended fall protection use

300

What should you use to access a scaffold platform?

A. The crossbracing
B. The outside frame, regardless of its design
C. A designated ladder, stairway, or other approved access
D. A nearby pallet stack

Correct answer: C. A designated ladder, stairway, or other approved access

300

Tools are sitting near the edge of an elevated platform above a walkway. What is the best action?

A. Secure the tools and provide appropriate falling-object protection below
B. Tell everyone below to wear a hard hat and continue
C. Move the tools one inch away from the edge
D. Leave them because they are not moving  

Correct answer: A. Secure the tools and provide appropriate falling-object protection below

400

Scrap material is blocking a stairway landing. What should happen?

A. Push it against the handrail
B. Leave it until production slows down
C. Make a narrow path through it
D. Remove it and restore clear access

Correct answer: D. Remove it and restore clear access

400

A portable ladder used to access an upper landing must have side rails extending at least how far above that landing?

A. 1 foot
B. 3 feet
C. 6 inches
D. 2 feet

Correct answer: B. 3 feet

400

 Why must fall clearance be checked before using a fall arrest system?

A. To determine how quickly the job can be completed
B. To decide whether a hard hat is needed
C. To ensure the system stops the fall before the teammate strikes a lower level or obstruction
D. To determine the harness color

Correct answer: C. To ensure the system stops the fall before the teammate strikes a lower level or obstruction

400

Before using a mobile scaffold in a stationary position, what should be done with its wheel and swivel locks, where provided?

A. Engage them to prevent movement
B. Leave them unlocked for quick repositioning
C. Lock only the wheels farthest from the work
D. Have a teammate hold the scaffold instead

Correct answer: A. Engage them to prevent movement

400

 A dockboard shifts as a teammate begins crossing it. What should happen?

A. Cross more quickly
B. Have someone stand on one end
C. Continue if the load is light
D. Stop use and have its placement and securement corrected before crossing

Correct answer: D. Stop use and have its placement and securement corrected before crossing

500

A walking surface is damaged and cannot be repaired immediately. What should happen before teammates use it again?

A. Send an email and leave the area open
B. Guard the area to prevent use until it is repaired
C. Tell experienced teammates they may continue using it
D. Wait until someone trips before taking action

Correct answer: B. Guard the area to prevent use until it is repaired

500

 When checking a ladder’s load rating, what weight must you consider?

A. Only the teammate’s body weight
B. Only the tools being carried
C. The teammate plus tools, equipment, and other carried materials
D. Only the heaviest individual item

Correct answer: C. The teammate plus tools, equipment, and other carried materials

500

 What must be arranged before teammates rely on a personal fall arrest system?

A. A way to provide prompt rescue after a fall
B. Permission to disconnect near the edge
C. A coworker willing to catch them
D. A plan to retrieve the equipment the following day

Correct answer: A. A way to provide prompt rescue after a fall

500

 A teammate needs more reach from a scissor lift. What is the best action?

A. Place a stepladder on the platform
B. Stand on the guardrail
C. Lean outside while another teammate holds them
D. Reposition the lift safely or select suitable equipment for the task

Correct answer: D. Reposition the lift safely or select suitable equipment for the task

500

 A teammate says, “This tank roof looks strong enough to stand on.” What is the best response?

A. Allow it if the task takes less than five minutes
B. Confirm the surface is suitable, safe access is provided, and required fall controls are in place
C. Allow it if someone watches from below
D. Assume lifting points can serve as fall protection anchors

Correct answer: B. Confirm the surface is suitable, safe access is provided, and required fall controls are in place

M
e
n
u