Safety & Hazard Recognition
Elevated Work & Fall Protection
Struck-By & Caught-in-Between
Energy Release
Hazards
PPE &
Respiratory Hazards
Job-Site
Hazards
100

Who is ultimately responsible for on-the-job safety?

What is you

100

Falls on the same level are usually caused by?

What is tripping or slipping 

100

Name two protective measures to prevent tools, materials, and equipment from falling on people below

What are toeboards, debris nets, catch platforms or canopies 

100

What is one of the most common safety grounding systems? 

What is the three wire system

100

In general what type of protection is required any time you are on a jobsite?

What is eye protection

100

What element is indestructible, has no taste or smell and can be found in old paints?

What is lead

200

What is safety?

A learned behavior and attitude 

200

What is a personal fall arrest system (PFAS)

200

Almost all tools and machines used in construction and industry work are equipped with guards that protect workers from?

What are rotating parts 

200

At what electrical current would your heart stop beating, experience severe burns where death may occour?

What is 10 amps

200

Prolonged exposure to what can cause silicosis?

What is silica 

200

This is an official authorization from the site manager to perform work that may pose a fire hazard 

What is a hot work permit

300

What is a measure of the probability, consequences, and exposure related to an event?

What is Risk

300

Where should you never stand on a stepladder?

What is top step or the top of a stepladder 

300

Do not stack materials higher than?

What is the 4:1 height-to-base ratio 

300

During lock out tag out who is the only authorized person to remove the lock?

Who is the authorized person who applied the lock

300

Where should you never wear gloves?

What is around rotating or moving equipment 

300

What does this pictogram represent?

What is oxidizers

400

What type of safety analysis can also be used as a pre-planning tool?

What is a job safety analysis (JSA) also known as job hazard analysis (JHA)

400

A ladder duty rating of type IA has a load capacity of?

What is 300lbs 

400

What is the most common and deadly hazard in excavation work?

What are cave-ins 

400

What can still be stored in a device or component even after the power is shut off?

What is energy

400

Anything above what decibel for an 8 hour time weighted average requires hear protection?

What is 90dB

400

With fire hazards this is the temperature at which a fuel is encouraged to burn

What is the flash point

500

When someone purposely causes property damage or injury, it is called?

What is an Intentional Act 
500

When examining a rolling scaffold what must you check?

What is the condition of the wheels and brakes 

500

To be safe, treat all soil as ____ unless proven otherwise

What is type C soil 

500

What is this?

What is a ground fault circuit interrupter (GFCI)

500

This can be found old floor tiles, pipe insulation, drywall compounds, and reinforced plaster

What is asbestos

500

A fire extinguisher is designed to remove what from a fire?

What is heat or oxygen

M
e
n
u