Cisco IOS
Which access method would be most appropriate if you were in the equipment room with a new switch that needs to be configured?
A. Console
B. Telnet/SSH
C. Aux
A. Console
What is the command to assign the name “Sw-Floor-2” to a switch?
hostname Sw-Floor-2
Which delivery method is used to transmit information to one or more end devices, but not all devices on the network?
A. Unicast
B. Multicast
C. Broadcast
B. Multicast
What type of cable is used to connect a workstation serial port to a Cisco router console port?
A. Straight-through
B. Coaxial
C. Crossover
D. Rollover
D. Rollover
What is the binary representation for the decimal number 173?
10101101
Which access method would be the most appropriate in-band access to the IOS over a network connection?
A. Console
B. Telnet/SSH
C. Aux
B. Telnet
What command encrypts all plaintext passwords access on a switch?
service password-encryption
UDP and TCP belong to which layer of the TCP/IP protocol?
transport
Why are two strands of fiber used for a single fiber optic connection?
The allow for full-duplex connectivity
How many binary bits exist within an IPv6 address?
128
Which IOS mode allows access to all commands and features?
privileged EXEC mode
What is the default SVI on a Cisco switch?
VLAN1
A device receives a data link frame with data and processes and removes the Ethernet information. What information would be the next to be processed by the receiving device?
IP at the internet layer
Which type of UTP cable is used to connect a PC to a switch port?
A.Crossover
B.Straight-through
C.Console
D. Rollover
B. Straight-through
Which IPv4 address format was created for ease of use by people and is expressed as 201.192.1.14?
dotted decimal
Which IOS mode are you in if the Switch(config)# prompt is displayed?
Global configuration mode
Which functionality is provided by DHCP?
Automatic assignment of an IP address to each host
What standards organization is concerned with the Request for Comments (RFC) documents that specify new protocols and update existing ones?
Internet Engineering Task Force (IEFT)
What is one advantage of using fiber optic cabling rather than copper cabling?
A.It is usually cheaper than copper cabling
B. It is easier to terminate and install than copper cabling
C. It is able to be installed around sharp bends
D. It is able to carry signals much farther than copper cabling
D. It is able to carry signals much farther than copper cabling
How many bits are in an IPv4 address?
32
Which IOS mode are you in if the Switch> prompt is displayed?
user EXEC mode
To what subnet does the IP address 10.1.100.50 belong if a subnet mask of 255.255.0.0 is used?
10.1.0.0
What standards organization is responsible for IP address allocation and domain name management.
Internet Assigned Numbers Authority (IANA)
Which procedure is used to reduce the effect of crosstalk in copper cables?
A. Avoiding sharp bends during installation
B. Requiring proper grounding connections
C. Twisting opposing circuit wire pairs together
D. Designing a cable infrastructure to avoid crosstalk interference
C. Twisting opposing circuit wire pairs together
Which is a valid hexadecimal number?
A. f
B. g
C. y
D. j
A. f