1
What is the melting point of aluminum
660°C 1220°F Pg 7
What is the melting point of copper
1085°C 1985°F Pg7
What is the melting point of lead
327°C 621°F Pg7
What is the melting point of magnesium
650°C 1202°F Pg 7
What is the melting point of carbon
3500°C 6512°F Pg8
Who issues a wide variety of standards including one that covers structural quality steels
CSA
Canadian standards association
Pg9
Who is a professional society of engineers in the field of ground, air and space transportation.
SAE
Society of Automotive Engineers
Pg9
Who is an association of steel producers that issues steel specifications and co-operates with SAE in using the same numbering system
AISI
American Iron and Steel Institute
Pg9
Who is a professional society of mechanical engineers that issues codes for boilers and pressure vessels
ASME
American society of Mechanical Engineers
Pg 9
Who writes specifications for a wide range of materials that are used extensively in the steel fabrication industry
ASTM
American Society for Testing and Materials
Pg9
What carbon % is in nails, screws, rebar
0.08-0.15%
Pg28
What carbon % is in shafts and high tensile tubing
Pg28
What carbon % is in forging dies, railway rails, springs
0.55-0.65%
Pg28
What carbon % is in hammers ans saws
0.65-0.75%
Pg28
What carbon % is in ball bearings, drills, cutting tools
1.1-4.4%
What alloying elements in steels increase strength
(You can just put the symbols)
Carbon C
Silicon Si
Copper Cu
Manganese Mn
Aluminum Al
Molybdenum Mo
Niobium Nb
Vanadium V
Pg 30
What alloying elements in steels add hardening capacity
(You can just put the symbols)
Carbon C
Manganese Mn
Molybdenum Mo
Chromium Cr
Nickel Ni
Copper Cu
Boron B
Pg 30
What alloying elements in steels that add toughness
(You can just put the symbols)
Nickel Ni
Niobium Nb
Vanadium V
Aluminum Al
Titanium Ti
Pg 30
What alloying elements in steels add elevated temperatures
(You can just put the symbols)
Molybdenum Mo
Chromium Cr
Vanadium V
Titanium Ti
Pg 30
What alloying elements in steels add atmospheric corrosion resistance
(You can just put the symbols)
Copper Cu
Chromium Cr
Nickel Ni
Tantalum Ta
Pg 30
What temper designation is as fabricated
F
Pg75/77
What temper designation is annealed
O
Pg 75/77
What temper designation is thermally treated
T
Pg75
What temper designation is work hardened
H
Pg 75
What temper designation is solution heat treated
W
Pg75