2023 Quiz
Pre Trip and Course
2024 Osha Regs
2024 Osha Regs 2
100

How low should your forks be during travel 

4 - 6 inches

100

There are a couple different techniques you can use for a competition pre-trip. Name one 

"Visually" Cut the lift in half - look top to bottom - Take advantage of viewing specifics if you complete a competition task before pre-trip 
100

If a designation of a truck includes LP, what type of fuel is being used?

Propane

100

If at any time a powered industrial truck is found to be in need of repair, defective, or in any way unsafe, the truck shall be...

taken out of service

200

What should you always do before exiting a piece of equipment

Ensure equipment has come to a complete stop

200

There are two styles of P.I.E. at IFDA 2024, name the one you will be using  

Raymond 8410
Raymond 7500

200

After watering an Electric Battery, what must you do to the vent caps? 

The battery (or compartment) cover(s) shall be open to dissipate heat.

200

T or F 

Trucks in need of repairs to the electrical system shall have the battery disconnected prior to such repairs.

T

300

There are main points in a visual inspection, name three

- Battery - Tires - Chains and Hoses - Control Handles - Coverings/general Safety 
300

What should you do during the pre competition course walk 

Understand scoring at each obstacle - Ask questions - Try and gauge different reference points for that obstacle 

300

An evaluation of each powered industrial truck operator's performance shall be conducted at least once every <___> years.

Three 

300

What is considered a safe following distance when trailing another industrial truck? 

Three equipment lengths 

400

If you took a sharp left turn on your equipment, what effect would this have on the load?

It would cause the load to shift to the right

400

What time do we load the buses Friday morning? 

5:30 - 5:45 AM

400

If modifications and additions to an already existing piece of equipment, which affect capacity and safe operation have been approved by the manufacture, what must be changed

Capacity, operation, and maintenance instruction plates, tags, or decals shall be changed accordingly.

400

An employer shall certify that each operator has been trained and evaluated. The certification or license shall include <___Name Two___> 

Name of the operator - Date of the training - Date of the evaluation - the identity of the trainer 

500

What OSHA Standard covers Powered Industrial Trucks?

1910.178 

500

What day do we get tickets to Disney?  

Saturday 

500

What constitutes a powered industrial truck being left unattended?

When the operator is 25 ft. or more away from the vehicle which remains in his view, or whenever the operator leaves the vehicle and it is not in his view.

500

How close is to close when parking near a railroad track? <____> FT

8

M
e
n
u