Wood Framing
The vertical members that act as the main supports in walls and are usually laid out on-center.
Studs
This tool gets its name from the round blade
Circular saw
Protects your head from falling objects.
Hard hat
A-frame ladders can be leaned on walls. True or False
False
To be early is to be.....
On-time
The framing member above a door or window.
Header
This tool has a chuck.
Drill
Keeping a shop clean is referred to as?
Housekeeping
This ladder can be made longer.
Extension ladder
Having a good ______________ helps make people want to work around you. This also helps make things go better.
Attitude
King stud
This tool is a flat L-shape, 16 inches on one side and 24 inches on the other side.
Framing Square
A GFCI stands for.....
Ground Fault Circuit Interuptor
This many point of contacted are needed to climb ladders.
3 points of contact
Being ______________ is having everything you need to get things done.
Being prepared
2" x 4" is the nominal size what is the actual size
1-1/2" x 3-1/2"
This tool has a table and a fence and can cut miters and bevels
Miter saw
Cord ends must not have this missing
Ground prong or plug
You need to stay this many steps from the top of an A-frame ladder.
2 steps
Having this, W _ _ _ E _ _ _ _ will get you very far in your job and make you very valuable to employers.
Work Ethic
These are the studs below a rough sill and above the header
Cripple studs
This tool has a spiral and is used to drill holes
Twist bit
These are things you put on your person to keep you safe from potential dangers.
PPE
The height above the edge of a roof an extension ladder is set.
3'
Doing _ _ _ _ _ will make you stand out as a good employee and keep you employed while others get let go or fired.
Extra