XLDS
Regulator supplies air to umbilical's at what PSIG?
350-375 PSIG
What size of hose is used on the XLDS umbilical's ?
1/4" (to reduce the weight and bulk of umbilical's)
EGS
Emergency Gas System
What depth does the pneumo gauge read to?
250 FSW
Low pressure gauge on console?
0-600
What is the difference between RDC-2 and RDC-3
RDC-2 allows for only 2 divers where RDC-3 allows for 3 divers. We currently have the RDC-3 at the unit.
Length of the Umbilical's ?
100 meters or 330 feet long
ICS
Intermediate Manifold Compensating System!
ICS Manifold regulator reduces the umbilical supply pressure supply from 350 PSIG to?
150-170 PSIG
What is the equation to calculate what your MMP needs to be set at?
Depth X .445 + OB =MMP
What year is the most update XLDS manual?
FEB 4th 2012
The communication / strength member has a safe lifting capacity of ____lbs and a breaking strain of _____lbs.
800lbs and 2200lbs
XLDS
Extreme Lightweight Diving System
EGS overpressure relief valve lifts between?
180-200 PSIG
At what pressure does the low pressure relief valve on the console go off?
390-420 PSIG (Dive Lab)
Can the XLDS be used for mix gas diving?
NO!!! However using a separate oxygen regulator system can be integrated with the reduced pressure manifold . This will allow for pure oxygen to be used for decompression purposes only. It is rated for a max depth of ???????? Bonus point
The pneumofathometer hose is what size?
3/16" made from black nylon plastic.
RDC
Rapid Deployment Control Console
How often are missions done on the XLDS console?
Every 2 Months
HP1 and HP2 whips are rated for?
Max working pressure of 5000 psig
Box weight of the XLDS?
87 pounds
Length: 28" W: 27" H:15"
what are the four components that make up the umbilical's?
breathing gas hose/ communications / strength member/ pnumofathometer / and 20' grab line.
DIN fitting
Deutsche Industrie Norm
Max depth with KM-97___? Max depth with MK-20__?
132 for KM 97 (with correction)
152 for MK-20 (with correction)
What size is the intermediate whip to the helmet or mask being used?
5/16"