Nut Plate
Tells you the diameter of the nutplate.
What is the color of the worm?
This is how man steps are in the CARC system.
What is 4?
This lays out the order the work instruction is written in.
What is the table of contents?
Can be used to repair stripped out holes.
What are helicoils?
Name of driver used install eddie bolts.
What is a Delta Rad driver?
Has a cure time of 4 hours.
What is CB200?
A test that determines cleanliness by spraying water on a surface and studying how it disperses.
What is a water break test?
What is supplies list?
The alternate names for helicoils
What are Standard Threaded Inserts and Helical Type Inserts?
Key used to keep pin in place.
What is a spline lock?
Has a work life of 3 minutes.
What is CB200?
What CARC stands for.
What is Chemical Agent Resistant Coating?
These are the steps you do before you go to break or leave for the day.
What are shutdown operations?
Used for corrosion protection.
What is yellow primer?
Deformations in the threads to lock the nut into the pin.
What are flutes?
The amount time you have from when the sealant enters the mixing tip to put it on the nutplate and install it.
What is work life?
This container needs to be labeled with the name of the chemical in it and any health hazards associated with it.
What is a secondary container?
This person is the one that will write the bulk of the work instruction.
What is a manufacturing Engineer?
This type of helicoil is not used for running torque.
What is Free Running?
Gauges used to check if the lobes are properly deformed.
What is a paddle or thimble gauge?
The out time for both CB200 and EC2216.
What is 30 days?
A very dangerous chemical contained in Alodine.
What is Hexavalent Chromium?
The color of shared operations between production and quality.
What is green?
This tool is used to inspect the helicoil after installation and the hole after helicoil removal.
What is lighted bore scope?
Coating used to show if lobes have been formed?