alpha
seal the pump rotor to the elliptical cam ring
Vanes
p/s pump has max pressure when doing this
Turning
injected plastic is design to help a steering shaft __________ in a frontal collision
Collapse
front wheel shimmy, excessive wheel free play and improper front toe could be caused by:
worn outer tie rod
this is used to install a p/s press on type pulley
p/s pump pulley tool
used on small cars with limited space where you cannot access an integral reservoir.
Remote Reservoir system
max output pressure dead heading test should not last longer than______>
5 seconds
in a rack and pinion steering this connects the rack to the knuckle.
inner and outer tie rods
40 seconds
typical air bag deployment
worn p/s pump bolts may cause
misalignment of p/s pump pulley
controls fluid from the pump to the steering gear
flow control valve
False
these components hold proper centerlink and tie rod height
pitman and idler arm
maintains electrical contact in steering wheel
clock spring
when in an accident and the battery cable has been cut the airbag will deploy due to:
back up battery / capacitor
limits the max pump pressure
pressure releif ball
designed to be one time use and should be cut off when removing
Stretch Fit Belt
1/2" per foot of free span
max deflection
a worn flex coupling in a steering column may cause _________ while the vehicle is driven.
rattling
does not use manifold pressure and uses p/s pump pressure the this unit to provide brake assist.
hydro-boost unit
bottomed out v belt could cause
slippage
erratic steering effort, squealing noise, low pump pressure could all be caused by:
loose P/s belt
T or F:
a loose idler arm will cause camber to change while driving
false