Electric
air tools are typically instead of electric because of this reason
they are typically larger and heavier
this tool is used to measure the amount of air in a tire
tire pressure gauge
never do this to a car hoist
overload weight
DA stands for what
Dual action
apply sealer or primer to a panel
paint gun
Battery Powered
Name the two ways sockets stay connected to impact wrenches
name the two styles of above ground lifts
2 and 4 post
self stick adhesive and hook and loop
air control valve
extension cords should be as long or short as possible
short
This is the word that refers to air powered tools
Pneumatic
this is a hydraulic hand pump for minor body and frame straightening
body jack
this is a long narrow air sander for flat surfaces
air file
this holds the paint in the paint gun
paint cup
This tool is used to remove dust and debris from the inside of a vehicle
Vaccum
this is used to cut, separate, or punch out pressed parts, depending on what bit you use
air hammer
Hydraulic tools use this to operate
hydraulic fluid
this is the tool most likely used with carbide burr files, for cleaning, deburring, blending and smoothing
die grinder
the part that the paint come out of
nozzle
name a reason someone might use an air buffer over a electric buffer
typically when buffing water is present from wet sanding which could cause electrical shock if not careful
mostly used for sanding spot welds for fast panel removal
name ways to tell a hydraulic tool is not working properly
spongy
tool wont extend fully
leaks under pressure
This is the tools used for stripping paint to quickly get to bare metal
grinder
This is the part of the paint gun that moves with the trigger to allow fluid to mix with air
Needle