This is the bottom of the block, where the oil is stored.
Oil Pan
How many main bearing halves does a CAT inline-4 block hold in total?
8
Name the missing order:
Camshaft, Lifters, ________, Rocker Arms, Valves
Pushrods
Instead of a torque value (ex: 250 ft/lbs), what is it called when it asks you to rotate the bolt by a certain degrees? (ex: 1/4 turn, or 60 degrees)
Torque Turn.
Correctly say value below:
0.3040
Three Thousand and Fourty Ten-Thousandths.
Name (3) types of fully electric CAT equipment.
Excavators, Dozers, Wheel Loaders, Forklifts.
Made of rubber or hardened silicone, the engine rides on these.
Engine Mounts/Suports
Name the 4 strokes in order.
Intake, Compression, Power, Exhaust.
True or false: The harness on a 3406B is similar to the harness on a C-13?
False. 3406B does not have a harness.
Where do you find torque values for your head bolts in SIS 2.0?
Disassembly/Assembly, or Specifications.
What scale on our micrometers allow us to measure in the Ten-Thousandths?
The "Vernier" scale.

Small enough to fit through a doorway, Caterpillar's smallest machine is the _______?
300.9D
How the engine oil is measured.
Dipstick
In an inline 6 engine, if cylinder 5 is on it's power stroke, which cylinder will fire next?
Cylinder 3.
Name the firing order of a CAT inline 6 engine.
1-5-3-6-2-4
What is the valve lash measurement for the intake and exhaust valves?
0.015" intake, 0.030" exhaust.
What tool was used to measure end-play on the crankshafts?
Dial Indicator.

The Caterpillar 6090 is the largest excavator on Earth. It's working weight of 2,200,000.00lbs is equivalent to 10 fully-loaded _________, Caterpillar's largest Dozer.
D-11 Dozer.
The lowest part of the oil pan is towards the front or the rear of the engine?
The rear.
How many times does the camshaft rotate for every (1) rotation of the crankshaft?
(the crankshaft rotates 2x for every cam rotation)
If cylinder 6 has just fired, which cylinder will fire next?
Cylinder 2.
On what stroke are these valves adjusted?
Intake: 1 - 2 - 4
Exhaust: 1 - 3 - 5
TDC Cylinder 1
What is this measurement? (1-2" micrometer)
1.3566"
A machine which is moved by hydraulic pressure has what kind of drive?
Hydrostatic.
How many bolts did your C3.3B oil pan contain?
30.
The engine oil pump pulls oil from engine oil pan and delivers it to the _________ . From there, the oil is directed to the__________.
Engine oil cooler, then filter.
How many degrees of camshaft rotation does each cylinder fire at?
60 Degrees of rotation.
While rotating your flywheel, a dial indicator is used to measure __________.
Runout.
264 in/lbs would be ____ ft/lbs?
22

Caterpillar Autonomous Haul-Trucks have hauled enough material to pave a 2-lane highway around the entire globe. The largest of these Self-thinking, self-driving behemoths is the ________.
CAT 797.
What (2) components keep the oil in the pan?
Drain Plug and O-Ring.
What (2) types of connecting rod caps are there?
Cracked Rods and Machined Rods.
True or False:
Head bolts are torqued numerically from the outermost bolt inward.
False.
True or False:
The bearings which surround the wrist pin can be replaced.
False.
(They are BUSHINGS, not bearings, and yes those can be replaced)

What is this tool called?
Dial Caliper.

Developed in the 1950's, and finally shipped in 1963, CAT's first Haul Truck was the ________ ?
769. Nice.
How many pieces make up a D-11's 3508 oil pan?
3.
This New York based football team helps keep the pistons cooled and lubricated.
Piston Cooling Jets.
True or False:
When looking at a camshaft profile, the exhaust valve opens first, BEFORE the intake valve.
True.
How much does a 10" extension change the torque value?
None, if kept straight.
How thick is the metal tip of a tape-measure?
1/16th of an inch.
The Caterpillar 797 is so large that it's bed can hold an entire movie theatre.

The Caterpillar museum, in this city, has such an example of one.

Peoria, Illinois.