Infeed (column 1)
The two drives that control the infeed linear pushers are
What is 1A70 and 1A71
1B20 is this type of encoder
What is absolute encoder?
The component that tracks the pocket position and is attached to the second wheel is
What is 1B20, the pocket encoder?
The total number of pockets on the pocket belts
What is 24?
Terminal number on the Twin Drives where the drive enable signal lands is
What is 6?
What is filter, voltage divider or anything that sounds right lol?
What is absolute and incremental?
The highspeed PLC cards that use signals from the two main encoders are called
What are Dicam cards?
The device that helps control the speed of the cig connection belt
What is 1S455
While tracing a wire through the prints and you come to a large terminal strip, you look for ____________ to help you continue following the signal
What is wire size?
The device that ensures the Wall Compactor is in the correct starting position is
What is 1S452 (home sensor)?
The number of channels that the main motor drive can support
What is 1?
1A1 is
What is the main motor drive?
For the lower hopper fill, the the device that reads cig level is
What are 1S456?
The network that allows the feeder main CPU to talk to the packer main CPU
What is ControlNet?
The first device the simulated encoder signal goes to from the Twin Drive that is controlling the cig connection belt is
What is 1A171, encoder duplicator?
The device that sends the main encoder signal to the TFC is
What is 1A249 (encoder duplicator)?
The proximty switch that is used for the home signal for main machine motor
What 1S516, torque regulator in exit section
The main safety relay for the H1000 packer (not complex) is
What is 1A240?
You will find 120 ohm resistors at the beginning and end of
What is DeviceNet?
All of the devices that are a part of the cig beaters motor loop are (6 not including the motor itself)
What is 1N50, 1N58, 1A51, 1A50, 1S457 and 1N262?
1K240 is associated with ____________ and if 1K240 is opened, will drop out this relay as well
What is breaking resistors and 1K181?
The parts of the machine that are moved by the main machine motor are
What are pocket belts, 1st wheel, 2nd wheel, 3rd wheel, 4th wheel, Exit belt, innerframe and blank pickup
The type of motor that runs the zero-setter
What is a stepper motor?
A PLC card will have a component letter of
What is N?