Plasma
The width of the cutting path
What is Kerf?
ID/OD
What is inside diameter/outside diameter
Level eye shade needed for plasma
What is shade 5?
The flame under the material
What is Tail?
The reason .75" square is a bad fit
What is cut through both sides?
The Direction plasma rotates
What is clockwise?
CAD/CAM
What is computer aided design/computer aided manufacturing
Recommended shoe type in a shop
What is hard toe or closed toe?
Distance between top of material and bottom of torch
What is torch height?
Not available in software releases prior to 7x
What is download link?
Materials that can't be cut with plasma
What is non-conductive or insulators?
DOM/HRPO
What is drawn over mandrel/hot rolled pickled and oiled?
PPE stands for
Personal Protection Equipment
The movement that happens between cuts
What is rapid travel?
This creates communication issues between the computer and the Dragon when the Dragon is near a welder.
What is EMF/EMI?
The reason medical or food grade is not a good fit
What is cut cleanliness or contamination?
NOMMA
What is National Ornamental and Miscellanies Metal Association?
Disengages Z sensor and puts the machine in emergency stop.
What is break away torch?
The location that the torch ignites
What is pierce height?
651.323.3438
What is Kyle's phone number?
The average pierces per a consumable
What is 1200-1500?
LRA
What is Length Radius Angle?
Systems used to ensure an operator stays near the machine or away from the machine otherwise the machine will pause
What is a light curtain and pressure mat?
This adjustment offsets the cutting path to accommodate for the width of the cut.
What is kerf compensation?
The maximum amount of bends per part in Bend-Tech software
What is 100?