Apex
FMVSS
Glass
Body
Bryan
100

30 min

What is MDAT?

100

208

 What is the standard for occupant crash protection and specifies equipment requirements for active and passive restraints, including airbags. There can be no separation of load-bearing safety assemblies in a 30-mph barrier crash. This pertains to the windshield because the passenger-side airbag deploys off the windshield to perform its safety function.

100

Decontaminate/Final Wash

What is Glass External or Internal frit?

100

Clean pinchweld/1-2mm/Apply Urethane

What is Standard Full-Cut?

100

body shop

What is rust over 24 in?

200

65-70

What is the Best application results are achieved when the BETASEAL™ APEX is first brought to a temperature between 65° - 70°F before use. 

200

219

What is windshield intrusion test measures the windshield’s ability to keep a 15 lb. object traveling at 30 mph from entering the vehicle cabin. The glass and adhesive bond protect occupants from the intrusion of external objects. When struck, the windshield can be displaced no more than 1/4 inch to pass.

200

Decontaminate/100 sand paper/Final Wash/Surface Treatment

What is Polycarbonate?

200

Achieve bright shiny metal/clean/trim/metal stick/ water/st/st

What is Corrosion?

200

1986

What is when Bryan stated to do glass?

300

ANSI 5.5

What is the automotive glass replacement shall only use retention systems with lot numbers and expiration dates printed on appropriate products

300

212

What is measures windshield retention in a barrier crash. Automobiles equipped with passive restraints must retain 50% of the windshield perimeter on each side of the vehicle. Vehicles not equipped with passive restraints must have no less than 75% glass retention. Some vehicle manufacturers require 100% windshield retention in this severe crash test.

300

Decontaminate/Final Wash/Surface Treatment

What is OEM Primed part?

300

Scuff pinchwelds/clean/st

What is Gasket set body?

300

pineapple and bacon

What is the best pizza?

400

14 Day

What is the open life of Surface Treatment?

400

216

What is the roof crush performance test. It measures the structural strength required to protect occupants if the vehicle rolls over. One and one-half times the unloaded vehicle weight, or up to 6,000 lbs. of force, is applied at an angle to the roof. Five inches of deflection or less is required to pass.

400

Decontaminate/Final Wash/Surface Treatment/Surface Treatment

What is clear glass?

400

scuff/clean/trim/st/st

What is Bare metal, Complete removal, and repaired or newly painted?

400

17

What is how many stats has Bryan installed glass in.

500

Below 77°F

What is Urethanes best stored at temperatures to maximize shelf life. (This refers to warehouse storage before being delivered to the technician for use.)

500

FMVSS

What is Federal Motor Vehicle Safety Standards are regulations for vehicle construction and performance. Certain FMVSS regulations pertain to the glass and its retention in the vehicle.

500

Decontaminate/Final Wash

What is a Gasket set part?

500

clean/st

What is Gasket set part gasket?

500

Primer

What is something we don't use.

M
e
n
u