The process of preventing hazards; such as chemical spills, tripping hazards, fire hazards, and cuts & bruises
What is housekeeping?
Having two feet and one hand or having two hands and one foot, when on stairs and ladders
What is 3 points of contact?
The industry term for turning off equipment and placing a tag or lock on the energy source.
What is Lockout Tagout Try Out?
Locations employees can be without having to wear PPE.
What is the Parking Lot, Breakroom, and Bathroom?
After explaining how to address a safety hazard, a superintendent asks his foreman to repeat the steps back to him to make sure he understands his instruction.
What is Actively listening and Practicing 3 way communication
Gates, devices, and locations away from people to prevent injuries around equipment.
What is guarding?
The document that is filled out at the start of every shift before using a ladder.
What is a pre-use inspection checklist?
The last step in LOTOTO before entering guarding.
What is verification of isolation?
5 Daily Fundamentals
What is Safety, Preventative Maintenance, Housekeeping, Productivity, and Quality?
Being safe on everything you do on the job site, also called "Walking the Talk".
What is Leading by Example
Using a fortress key, E-Stop, Keyed E-Stop, or interlock to open a door for a task that happens at least twice a day and necessary to continue production, during production hours.
What is keyed-switch procedure?
An area that an operator cannot see clearly - should have a spotter or sound a horn when getting close to this. Also the reason why forklifts should travel in reverse when carrying tall loads.
What is a blindspot?
This page is filled out and approved before entering any equipment that is actively energized and possibly operating BEFORE passing guarding.
What is a Close Proximity Maintenance Permit?
The color-coded diamond (red, yellow, blue, and white)
What is a NFPA Diamond/704 Placecard?
If an apprentice identifies a job hazard and helps to come up with a solution, her/his foreman should use __________ to reward her/him.
What is Recognizing Team Members for a Job Well Done.
The form needed when breaking the plane/entering a hopper, screener, grinder, color machine, or volumetric filler?
What is a confined space permit?
The form that is filled out prior to loading any van trailers.
What is Van Trailer Inspection Sheet?
Who can enter the restricted approach boundary on the equipment?
What is only an electrically authorized employee.
The document that must be filled out for any task performed that is outside of the employees normal job duties
What is a TRACK Form?
An experienced worker respectfully tells a team member why what he is doing is unsafe and explains how he can do it more safely.
What is Engaging and Empowering Team Members
The maximum psi allowed for air wands used to clean surfaces
What is 30 psi?
The maximum speed limit allowed on plant grounds?
What is 5mph?
Guards must be attached
What is in a way that a tool is required to remove them?
Bend at the knees, keep the back straight, and lift with your legs
What is proper lifting techniques?
At a daily safety huddle, a foreman asks for input from her team on what hazards they may face during the day, and how they plan to avoid them.
What is Developing Team Members Through Teaching , Coaching and Feedback