NOTES
To conserve space on the print and to save time in preparing the drawing a note is often known as a ---------
What is a symbol
The ----- dimension of a slot weld is located to the left of the weld symbol.
What is the width.
Both plate and sheet are available in width up to ------
What is 200 inches
In the standard welding system the ------- is used to apply weld symbols and other data.
What is the reference line.
It indicates the exact point of reference.
What is a leader.
The vertical leg of a fillet weld symbol is always shown to the ------
What is the left.
High carbon steel has a carbon content of -----
.30% to .90%
When the seam weld symbol is located ---- the reference line the dimension can be placed on either side of the reference line.
What is astride.
It's a lettered information concerning the details of construction
What is a note.
When a weld symbol is placed on the reference line on the lower side of the line the weld must be made -----
What is the arrow side.
The percentage content of low carbon steel.
What is .30% and less.
When multiple reference lines are applied to the basic welding symbol the field weld symbol may be added to ------
What is all of the reference lines.
Weldment very often include ------- parts
What is threaded.
When the ------- symbol is used a length dimension is not needed.
What is weld- all- round.
The first number in the AISI classification system indicates what?
What is the basic type of steel.
When multiple reference lines are used first reference line is located -----
What is closest to the arrow.
The sharp edge of a bevel is known as a ----
What is a feather edge.
There are three elements that may be applied to the stud weld symbol.
What stud size spacing and number of stud welds
Metal plate is grater than -----
What is 3/16 inches in thickness