STANDARDS
These are considered the FS division's standard manhole diameters
What are 48", 60", & 72"
These devices allow a base form to roll over
What are trunnions
The pour/strip procedures can be found here
What are approval drawings
*The approval drawings can now be found at the opportunity level within Salesforce for better team visibility
This is the quantity of "sizes" for the SmartRoll friction brake device
What is 3
*Small, Large, & X-Large
The product retaining pin is not needed during rollover
What is false
*Form equipment MUST include designed product retainer pin during roll-over. DO NOT Rely on plastic inserts to retain the product.
The FS division's standard shop tolerance
What is +/- 1/8"
The ganged latch is standard on this manhole jacket
What is one-piece
These items create recesses in form walls
What are knockouts
*Manufactured from steel or UHMW
This is the number of SmartJax legs
What is 7
*Base, SJL2, SJL3, SJL4, SJL5, SJL6, SJL7
Plastic breakoff steps are inserted from inside of the core
What is false
*No core access is needed. These are inserted into the steel collars from outside the core
What is +/- 1/6"
This thickness of material is used on most core/jacket equipment
What is 1/4" plate
The operating pressure (preset) on SmartConnect
What is 1100 PSI
*Maximum operating pressure: 3000 PSI
As of today, the FS division offers single offset box culvert joints
What is false
*The current offering is limited to mortar joint profiles
This is the quantity of standard joint ring profiles offered by the FS Division
What is 7
This type of equipment uses a "cover plate"
What is manhole slab top
The hydraulic pumping unit mounted to a cart has a ____ gallon reservoir
What is 5
This is the rated weight capacity per leg for SmartJax
What is 6,000lbs
The traditional air/pneumatic Crete Hawg has two ___ gallon air tanks
What is 26
This release agent is recommended by the FS division
What is Grifcote-CC-150-VOC
This is the specified capacity of the X-Large SmartRoll friction brake device
What is 50 ton or 100,000lbs.
*50,000lbs. each & 100,000lbs. per set
*Target manhole diameters: 102" - 144"