Tire basics
What part of the tire contacts the road surface
What is the tire tread
Why should you always use a torque wrench on lug nuts?
What causes wear on both edges of a tire
what is under inflation
what tool is used to measure lug nut torque
what is a torque wrench
In the tire size 205/55/16 what does the "205" represent?
what is tread width
What does the sidewall of a tire show
What is tire information. Tire size, load index, speed rating and manufacturer info
What pattern should lug nuts be tightened in?
What is a star or criss cross pattern?
what causes wear in the center of the tread?
what could happen if lug nuts are over torqued
what is stripped studs or warped rotors
what is a bus full of dead puppies
In the tire size 205/55/16 what does the "55" represent?
what is the aspect ration?
What part of the tire seals against the rim?
What is remove the valve core
What causes onesided wear on a tire
what is camber or toe alignment problem
what should an impact be used for when installed wheels on the vehicle?
what is seating the wheel to the hub, not final torque
what is the direction in the direction the tire will roll when moving forward
What does the R stand for in 265/65/16
What is Radial construction
What causes bead damage during tire mounting?
What is Improper tool use or lack of lubrications
also
what is no knowing what your doing
what type of wear results from incorrect toe adjustment
what is feathered or scalloped edges
or
what is premature edge wear
why should you never use an ipact gun to final torque lug nuts
what is it may cause inconsistency and or damage
what does the load index tell you?
what is How much weight the tire can safely carry
What is the "65" in 225/65/17
What is the Aspect Ratio
What is poor traction, Hydroplaning, and faster wear
what is worn suspension or unbalanced wheel
what could cause a wheel vibration that changes with speed
what is an imbalanced tire
what does the speed rating represnet?
what is the maximum speed the tire can safely handle