Pre
Trip
Trip
These should have NO LESS than 4/32 depth
What are the steer tires?
Always make sure this is closed before parking equipment for the day
What is the road safety?
This should always be done before connecting the fill hose
What is putting on a new seal ?
This should always be loaded first when delivering oxygen
What is the reserve tank?
Your try to turn on the pump and nothing happens, what can you do or check?
The temperature on the meter
LPA alarm
Right PTO turned on
Use bypass (last resort)
These should have NO LESS than 2/32 depth
What are the drive tires?
These should always be left behind the truck when you park your truck
What are safety cones ?
If it gets lower than 2 psi, you won't be able to start loading
What is the tank pressure?
This should be done to set up a safe perimeter when delivering to a customer
What is putting out safety cones ?
One of these should be completed if you find something unsafe at a customer location
What is a site deficiency report?
It is important to identify which type of these you have before taking any equipment
What is the type of pump?
This should be done ANYTIME you finish operating equipment
What is a Post Trip DVIR ?
One of these will have to be done if there is no pressure in the trailer
What is change of grade ?
This should always be done before connecting the hose
What is putting on a new seal ?
This thing is open if liquid is shooting out of your vent
What is a hose drain or rapid cool down ?
You should always check this to make sure you have the correct load
What is the COA?
When it's cold, these are used to keep the truck warm
What are the heater plugs?
You can only start three, but no more than that, they're supposed to be done at 8 o' clock flat
What is the batch test?
You should ALWAYS do this before disconnecting the fill hose
What is opening the hose drains? (to release the pressure)
Eh, it'll be fine...
What are "Famous last words" ?
This should be done ANYTIME you operate or switch equipment
What is a Pre Trip DVIR ?
Always clean these, when fueling the truck
What are the windows, floors & steering wheel?
This should always be done when you are finished with your route
What is loading the trailer ?
These two processes MUST be done to ensure safe operation of the equipment before you can unload
What are the pump cooldown and medical purge?
Your electric pump is frozen and will not start, what do you do?
Turn it off then:
Use hot water
Turn it on then:
Close pump inlet and tap the pump with your hammer
Call trainer > manager > mechanic > dispatch