Haney's Questions
Collins' Questions
Thompson
Davis' Questions
Cisneros' Questions
Ganbold's Questions
A/V
100
The PSI range at which the spring breaks will kick in 
What is 20 - 45 PSI
100
Name two devices that warn a CMV driver of low air pressure
Lights, Buzzer, or wig wag 
100
This is what you do if your low air alarm does NOT shut off after your air supply is greater than 55 psi?
Check system for leaks or damage, do NOT operate.
100
This is the most common problem found in road side inspections
What are out-of-adjustment brakes?
100
The max amount of pressure loss allowed per min. on an air leak test for combo vehicles
4 psi / min
100
The two types of breaking techniques during emergency stops
What is controlled breaking and stab braking?
100
What is this?
An Evaporator
Bonus: What does it do?
200
The only situation in which you would NOT apply your parking brake when parked.
What is when the brakes are very hot?
200
The diffrence between a service brake test and a parking brake test.
A parking brake test is conducted with a stopped vehicle while a service brake test is conducted with a moving vehicle (5 mph)
200
The Emergency valve is this color on your dashboard
What is red?
200
This is how do you "fan off" air pressure in the air storage tank
Stepping on and off the brake pad repeatedly
200
Explain how to acuratly preform a parking break test
Bring vehicle to a halt, apply the parking brake, try to then pull away in a lower gear to test the hold.
200
The stopping distance formula
Perception distance + Reaction Distance + Brake lag Distance + Braking distance = Total Stopping Distance
200
What is this?
A drum brake
300
The reason for using your breaks on long & or steep down grades
What is to supplement the braking effect of the engine?
300
This step ensures air pressure builds from 85 to 100 psi within a safe time limit during startup.
What is the air buildup test?
300
Automatic slack adjusters are seen on all vehicles build after this year
What is 1994
300
Driver fans the brakes from 120 PSI. The spring brakes pop at 55 PSI.
Why would this be a failed inspection?
The spring brakes should activate at approximately 20–45 PSI. Popping at 55 PSI indicates a defect.
300
Automatic adjusters are only adjusted in these two situations
when preforming maintenance on brakes, and during installation of slack adjusters
300
How does Antilock brakes affect your braking technique?
It does not, brake normally
300
What is this
A Wig Wag
400
What is this thingy
A S-Cam
500
You are applying the breaks while driving and hear this noise, what is wrong with your brakes
Worn Brake Pads