Rack Uncrating & Movement
The Minimum number of people required to safely uncrate and move a rack
4 people
What is the Turtle Machine's maximum weight capacity?
3,500kg (7,716)
Where should the PE5 cable always be installed?
On the right side
How many people are required when moving a rack on a ramp with a slope greater than 5 degrees?
a minimum of four people
How many people are required to remove and set aside the crate door?
At least 2 people
What speed mode should be selected when pulling a rack during uncrating?
Turtle mode (slow mode)
Where can technicians find deployment and cabling instructions for Ghostfish Lite and Ghostfish Lite with Brazos?
In the Population Guide available through Talos (searchable by build ID or TLA)
How high should a crated rack be lifted during transport with a forklift or Ballypal?
Only 2-4 inches off the ground
What tool should be used to move the rack after it is off the ramp?
A Rack Puller
During floor movement,how should the Turtle move the rack?
The Turtle should pull the rack while the second person guides it from behind
What is the purpose of this work instruction?
To describe the end-to-end process for placing and populating Ghostfish Racks as part of a Ghostfish pod for pandora
In which direction should a rack always be moved?
Lengthways (using the narrow ends)to maximize stability
What should be inspected on the rack before moving it down the ramp?
The caster wheels for cracks damage or jams
If the Turtle overload protection trios, what should the operator do first?
Check for stuck caster, use rack grippers to free the wheel, and if needed, reset the Turtle by turning the key off and back on
What tools should be available before beginning Ghostfish rack placement?
Phillips Screwdriver, impact driver with sockets, approved safety blade, flashlight, measuring tape, two little giant safety cage ladders, and a ViperFish/Ghostfish transportation.
How many straps are required to secure a crated rack inside a trailer for transport?
4
What tool should be used to remove the klimps, and should they ever be removed my hand?
Which rack types require the bottom hook instead of the top gripper assembly?
SB400, FBR400, and Zoid Racks (Racks with an open bottom)
How many Shipping Brackets must be removed before deployment?
Three: One top shipping bracket and two lower side shipping brackets.
What are the primary responsibilities of the spot during a rack movement
Conduct the last-minute risk assessment,inspect the travel path, guide the team, communicate with operators, monitor clearances, and watch for hazards throughout the move.