Awareness
Identify Potential Hazards(CH4)
Product Control
PPE
100

What are the nine hazard classes

Explosives, Gases, Flammable liquids, Flammible solids, Oxidizing substances, Toxic, Radioactive, Miscellaneous.

100

What is the temperature at which a liquid change to a gas at a given temperature

Boiling point

100
Responders use spill control to ___

Confine a HazMat after a release

100

APR's use a sorbent material to 

Remove the targeted vapor or gas from the air

200

What's the difference between Simple and Chemical asphyxiant? 

Simple Displaces, Chemical Prevents the proper use of oxygen

200

An assumption of the GEMBO about containers is

All containers have failed or have the potential to fail

200

A spill of this type of HazMat may require the use of dispersion methods 

Hydrocarbons

200

What should be considered when selecting PPE?

Hazards, Detection readings, Environment, Exposure duration, Clothing equipment, ease of deacon.   

300

What class 5 hazmat is both a fuel and an oxidizer and may violently react if it reaches its SADT

Organic Peroxide

300

What is the dispersion or engulfment pattern of a BLEVE

Cone

300

How do adsorption and absorption differ?

Adsorbents physically adhere to the materials, while absorbents are absorbed into the material's inner spaces

300

Repeat exposures to sounds greater than __ decibels can cause damage to the inner ear

85

400

The petroleum sour crude oil marking denotes crude oil that may present an inhalation hazard because it contains ___

Hydrogen Sulfide

400

Materials with a lower boiling point have higher ___

Vapor pressure

400

AFFF foam should not be used on these types of materials 

Water miscible materials (alcohols)

400

What information does a safety briefing cover

Incident status, identified hazards, task and assignments, expected duration to the task, escape route, PPE, hand signals

500

What did the SARA act create?

The Right to Know

500

Inhibitors control or prevent undesired chemical reactions by increasing the need for ___ necessary to start the reaction 

Activation energy

500

How is foam quality measured

It is measured in in terms of its 25% drainage time and its expansion ratio 

500

A class 4 CBRN ensemble provides the wearer respiratory and skin protection from __

Biological and radiological particulates below IDLH values

M
e
n
u