Power tools
which type of tools are powered by air energy?
Pneumatic
power-actuated tools may be prohibited on a job site due to______.
the presence of people in the building
an important part on a drill that enables a user to back out a drill bit when it is stuck in the work material is called a ____.
reversing switch
use only band saw that has a
stop
when sawing lumber, begin the cut so that the kerf will be______.
on the scrap side of the marker line.
which type of pliers are used to hold and bend wire and grip and hold objects during assembly
slip-joint pliers
Table saws with 10-inch blade are excellent for____.
Carpentry jobs.
when using grinder, two of the most important pieces of ppe are____.
face mask and ear protection
which levels are becoming more common in construction due to their versatility?
what is digital levels
when using a jigsaw, avoid vibration by
using a clamp to hold the workpiece
a heavy-duty hammer used to drive posts or take on demolition work is the_____.
Sledgehammer
which shovel blade is used to shape trenches or holes that smooth, straight sides?
Spade
when using a portable band saw, make sure that the stop is placed firmly against the _____.
object being cut
What disadvantage of a laser measuring tool is that it________
does not work well in smoky conditions.
which type of square combines a protractor, try square, and framing square?
what is rafter angle square
hammer drills are safe to operate near flammable materials
false
the first step to prepare a power drill is to____.
disconnect it from its power source
when should the blade of a utility knife be replaced?
when it stops cutting and tearing materials
a porta-power is an example of a _____.
hydraulic tool
the trigger lock on power tools should be used to lock the trigger in on position
TRUE
which type of clamp has broad wooden jaws that spreads the pressure over a wide area?
what is Hand-Screw
when using a power tool, it is important to always___.
wear the proper PPE
one situation that can make a measurement with a laser inaccurate is measuring to a ____.
highly reflective surface
which of the following types of hammers is generally with carpentry
Claw
cordless drills typically do not have a____.
Keyed Chuck
one characteristic that makes an oscillating multi-tool so useful is its ability to____.
fits into tight places.
pushing a board against a table saws blade before it reaches full speed
can cause kickback and serious injurys
a wooden folding rule is usually mark ______on both edges of each side.
what is sixteenth of an inch
in the way is a spud wrench different from a pipe wrench?
it has smooth jaws
if i do not pass my test i can't______
pass this class
why is it unacceptable to use a power-actuated tool to fasten a plywood sheet to a wall stud
the fastener can easily pass through both materials, and causing an injury
the blade of an abrasive cutoff saw spins at such a high speep
the resulting friction is hot enough to burn through metals
the most important maintenance on a circular saw involves the___
battery charge
sawzall is another term commonly applied to_____.
reciprocating saw
proper ground fault protection pervents
electric shock
before connecting any power tool the power source , it is critical to_____>
confirm the power source is off