Loud and Dangerous
his document explains safety issues, chemical details, and handling instructions for jobsite products.
What is a Safety Data Sheet (SDS)?
This specific extinguisher class handles fires involving ordinary combustibles like paper and wood
What is Class A?
This term defines the measure of rotational force produced by a drill.
What is torque?
The exact sum when you combine 24’ 6 1/8” and 13’ 2 ¾”.
What is 37’ 8 ⅞”?
This versatile hand tool combines a painter's scraper, putty remover, and roller cleaner in one blade
What is a 5-in-1?
Prolonged noise exposure starting at this decibel level can permanently damage your hearing.
What is 85 dB?
This fire extinguisher class treats electrical fires.
What is Class C?
To prevent material splitting, a pilot hole must match this part of the fastener.
What is the shank?
This fundamental geometric rule uses a right triangle ratio to check for square.
What is the 3-4-5 rule?
This prying tool is designed with a flat, leverage-building blade to pull nails and separate material.
What is a prybar?
When placing an extension ladder, you must set it on solid ground, ensure 12 inches of support on each side, and use this lean angle.
What is 4 to 1?
This term describes materials requiring high temperatures or prolonged heat exposure to ignite.
What is combustible?
Historically, nail sizes are identified using this coinage-based unit.
What are pennies (d)?
Because level measures horizontal alignment and plumb measures vertical alignment, their relationship is always this.
What is perpendicular?
This power saw uses rapid back-and-forth inline strokes, commonly used for demolition framing cuts.
hat is a reciprocating saw?
Three major jobsite hazards often found in unsafe working conditions include electrical shock, fire risk, and this common slip hazard category
What are slips, trips, and falls?
The second action step when operating a fire extinguisher, right after pulling the pin.
What is aiming the nozzle at the base of the fire?
Between a smooth shank nail and a coarse thread screw, this fastener provides superior holding power.
What is a coarse thread screw?
The fractional reading located halfway between 3.5 inches and 4 inches.
What is 3 3/4"?
This driver bit design features a star-shaped pattern with 6 points.
What is a Torx (or Star) bit?
These three specific elements must combine to trigger a fire.
What are oxygen, fuel, and heat/spark?
This component on a fire extinguisher indicates whether the canister has proper pressure.
What is the pressure gauge?
This power saw features a circular, rotating blade set into a flat table bed.
What is a table saw?
The reading on a tape measure when pointing 1/16th of an inch past the 6-foot mark.
What is 6’ 1/16” (or 6 feet, 1/16 inch)?
This power saw swings on a pivot arm to deliver precise crosscuts and angled cuts.
What is a miter saw?