H&P
Lifebelt of the Month
Use of electronic devices, including cellphones, only as approved
What is AAR? What are the 4 Questions?
AAR- After Action Review: brief learning process conducted immediately after completing LAI potential task or critical action.
1.What was supposed to happen?
2.What actually happened?
3.What were the differences?
4.What can we learn?
What is the function of Blind Rams?
To seal off the open hole
What Is The H&P Help Desk Phone Number?
918-588-5515 or 5515 from RM or DC satellite phone.
Name two types of drill bits used in the industry today.
Currently in the drilling industry, there are two main categories of drilling bits: rolling cutter bits and fixed cutter bits. Plus, bit sizes vary from 3-7/8 inch to 36 inches.
Fixed Cutter Bits or PDC(Polycrystalline Diamond Compact)
Rolling cones or rolling cutter bit
What does RSMT stand for?
Rig Safety Management Team
What is a MERP, and Where is Located?
Medical Emergency Respond Plan.
Safety Trailer, RM House, OS Office, Drillers Cabin.
What is a “flow check”? and when it needs to be done?
Observing the well for flow after the pumps have been shut down.
Before pull off bottom, at csg shoe, before L/D BHA,
and anytime the displacement is not accurate.
What does RSMS means
Rig Systems Monitoring & Support
What is the minimum length for the saver sub that we can use on ours tds?
The minimum saver sub length
is 7.5 inches
What does C.O.A.C.H stand for?
care, observe, approach, converse, help
What does the acronym PSMS stand for?
Personnel Safety Management System
What is the BOP stack rating?
10k
Explain Hard Shut In and Soft Shut in.
Hard shut in is when while drilling the choke stay closed
Soft shut in is when while drilling the choke stay in the open position
What is and What size are the VBR's in the BOP?
Variable Bore Rams 3 1/2 - 5 1/2
It is a component that can seal around drill pipe and other tubulars of varying sizes
What are the H&P core values?
Actively Care
Service Attitude
Innovative Spirit
Teamwork
Do the right thing
What is the focus of PSMS?
To eliminate Life Altering Injury.
What its the low-high psi tested on BOP rams?
250 low
10k high
On a 7500 psi rig, what is the pressure range on the rig Standpipe Transducer
0-10k
What is an Iso-Lock?
Iso-Locks are a critical component to a WF3 rigs, used to lock the structural boxes of the rig together. WF3’s have 18 Iso-Locks in total
What are the 4 permits available electronically on eSAFE
LO/TO/TO
Hot Work
Confined Space
Overhead Tools Checklist
Name 3 focus areas to an effective Pre-Task Brief: (how to hold a safety meeting)
1.Identify and review applicable LSRA
2.Have 2-way engagement about Hold Points and Triggers
3.Use or ask the 5 key questions
Why is it important for crew members to immediately inform their driller if they see any potential well control problems?
To help driller identify and act to minimize the size of a kick
What Is The PSI Rating For The Rotate Head?
Dynamic and Static?
3000 static
1500 dynamic
What size is the rotary table? and what kind of energy it needs to operate?
27.5” Hydraulic Rotary Table