General Safety
What must you wear before entering the workshop.
Safety Glasses.
When is it safe to remove wood scraps from the cutting zone?
While the saw is off and the hand is not on the On/Off trigger
______ are essential hand tools used for striking, driving nails, breaking objects, and shaping materials across trades like construction, metalworking, and upholstery.
hammer
When operating the drill press, what should be done with long hair?
Tied up/held away from drill press
What liquid should you use to clean rusted bolts, screws etc.
White Vinegar / Apple cider vinegar.
Is horse play allowed in the workshop?
Absolutely not.
Where should the saw blade be aligned when making a cut with the motorized miter saw?
Always on the line
A _____ is a hand tool designed to provide grip and mechanical advantage in applying torque to turn objects, most commonly nuts, bolts, and pipes.
wrench
When drilling long material what precaution should be taken?
Support unclamped end with stand
How long should you soak the rusted items for?
12 or above hours.
What must you do before leaving the workshop?
Clean everything up.
How must the saw blade be held after the cut is finished and before the blade stops rotating?
Hold it in the down position
A _____ is a versatile power tool primarily used to create round holes in various materials like wood, metal, and plastic by rotating a cutting bit.
Drill
Stock chips and curls should be removed from the drill press using
A Brush
What do you save from not buying new tools but you restore them instead?
Money, gas, and the environment.
True or false: Only you are responsible for the safety of the workshop.
False, everyone is responsible
What special protection must be observed when using the motorized miter saw outside?
Connect the saw to a ground fault circuit interrupter (GFCI)
A _____ is a tool with a sharp, beveled metal blade used for carving, shaping, cutting, and removing small amounts of material like wood, metal, or stone.
chisel
What type of drill press chuck should be used with a straight shank twist drill?
Jacob’s Chuck
What other thing can you use besides from vinegar for rust restoration?
baking soda paste, citric acid, lemon juice with salt
True or false: I can only horse play if the teacher allows me to.
False, the teacher will never allow you to horse play in the first place, it is very dangerous.
Hands or fingers should never come closer than ___________ to the rotating blade when operating the motorized miter saw
6 inches
A ______ is a versatile hand tool designed primarily for cutting hard materials like metal, plastic pipes, rods, and conduit. Featuring a fine-toothed blade under tension, it is commonly used in plumbing and construction.
hacksaw
After a drilling operation is completed what potential hazard should the operator be alert to__________.
sharp edges and burrs around the hole
Timmy uses kitchen and mustard to remove rust, does it really works?
Yes, ketchup works for removing rust because it contains acid and vinegar. Mustard also works to remove light rusts.