AERZEN
HISTORY
HISTORY
This is the year Aerzen USA SE Region was opened?
2020
This is the most commonly sold size of Aerzen GM Blower
GM25_S
In a VML25R, the "R" indicates this package style.
Belt Driven
This is a Safety Culture Application that ensures proper site safety procedures are followed.
JSSA (Job Site Safety Assessment)
Per Aerzen USA Handbook, Field Service Technician business hours start at ___________
07:30 am M-F
The Aertronic 1.0 was marketed and sold starting in what year? 1998, 2001, or 2006.
2001
Per the O&M Manual, blower oil should be changed every _________ hours or every _____ years.
8,000 hours or every 1 year.
This is the maximum discharge pressure for a VML compressor.
29 PSI
Field Service Reports and ___________ are to be uploaded to the job folder upon completion of the relevant work order.
Photographs
Technicians can receive customer gifts that have a value no greater than __________.
$0, no gifts allowed
This is the year that Aerzener Maschinenfabrik GmbH was founded. 1923, 1896, or 1864
1864 (162 Years Previous)
This is the direction of rotation for the acoustic hood fan.
Counter Clock-Wise
The two internal compression ratios available on most VML compressors.
1.8 & 2.3
An unplanned event that does not result in injury, illness, or damage, but had the potential for harm is called a ________ and should be recorded where?
Near Miss, Safety Culture App via QR code.
Full Time Service Technicians start each January 1st with this many PTO days for their first full year of service.
17 days or 136 hours
This is the year Aerzen USA was founded. 1983, 1985, or 1986?
1983
Intermediate, atmospheric-vented space built into the shaft sealing system of Aerzen positive displacement blowers is called:
The Neutral Chamber(s)
This component changes the compressor stage speed to match customer flow requirements.
Gearset
Aligning of the motor pulley to the blower pulley utilizes this properly calibrated tool.
Belt Hog Alignment Tool
1 day (8 hours)
Who is the current CEO of the global Aerzen Group (Aerzener Maschinenfabrik GmbH)
Klaus Peter Glöckner
If Delta Lube oil is to be used to replace any other oil type, completely drain and fill with Delta Lube 6 oil. How many run hours should be recorded before the next oil change.
100 operating hours (page 189 GM O&M Manual)
This is the primary reason selecting the correct Pi ratio is important.
Efficiency/HP
This method architecture requires the VFD to provide a "running" status to the Aertronic which in turn will run all safety routines, monitoring, cooling fans, and oil demisters?
Method 2
She is the current Vice President of Human Resources at Aerzen USA.
Devon Torchiana