Safety
Shop Etiquette
Welding
Oxy-Gas Cutting
General Ag Mech
100
What should the welder say to bystanders before striking an arc when arc welding?
What is Cover!
100
How far should the oxygen cylinder valve be opened when oxy-acetylene cutting?
What is all the way
100
A welding rod that is classified as an E6013, can weld in what type of position?
What is all positions
100
Gas leaks with oxy-acetylene hoses are checked with...
What is soapy water
100

The color in the safety color-code system which designates caution.

What is yellow

200

The Meaning of Safety Red in a shop setting

Danger

200

The four PPE equipment you should always have on when welding 

Helmet, Gloves, Jacket, Safety Glasses 

200
With an electrode diameter of 1/8 of an inch, the arc length should be how much?
What is 1/8 of an inch
200
What type of flame is the correct type of flame for heating, cutting, and welding with oxy-gas equipment?
What is neutral flame
200

The tool you use when fastening a screw

what is a Portable or wire drill 
300

When entering the shop, you should always wear...

Safety glasses

300
Which of the following is not part of the fire triangle? Fuel-Heat-Combustion-Oxygen
What is Combustion
300
What do the letters M.I.G. stand for?
What is Metal Inert Gas
300
When oxy-acetylene welding, the acetylene must not be used at a pressure greater than?
What is Mr. Bond- 7psi Standard- 15 psi
300

Mrs. Hudgens' #1 and #2 rule for out in the shop

What is Always wear safety glasses and No horseplay 

400
What does PPE stand for?
What is Personal Protective Equipment
400
What type of flame shows two parts- a short inner cone and an outer flame that is bluish to orange with a nearly colorless edge?
What is oxidizing
400
When metal arc welding, the shade of lens used should be at least what shade or darker?
What is 10
400
An example of an oxy-acteylene flame where the acetylene is set too high in relation to the oxygen is called what?
What is Carburizing flame
400

The safety color that means warning 

What is Orange

500
When opening the cylinder valve, where should you stand?
What is to the side of the cylinder?
500

5 daily clean-up procedures...

What is Shut off all equipment ,Drain Hoses, Clean up work area area, Sweep Put tools away Wash Hands

500
What to the letters AC stand for, when dealing with an AC Welder?
What is Alternatiing Current
500
Never open the ______ valve more than 1/2 a turn
What is acetylene
500
What should be used to light the torch for oxy-acetylene cutting?
What is a flint striker
M
e
n
u