Hand Tools
Used daily to measure correct lengths for fabrication practices. it extends and retracts.
What is, a Tape Measure?
A "90 Grinder" is typically powered from what source?
What is Pneumatic, or Air?
What are the 3 basic rigging sling hitches?
What is:
- straight pull
- choker hitch
- basket hitch
A non-consumable electrode that is unique to the TIG welding process.
What is Tungsten Electrode?
A hand tool used to remove slag from weld beads.
What is a Chipping Hammer?
(File)
Name for an adjustable wrench with an alignment pin as the handle.
What is, a Spud Wrench? (Spud Crescent)
This tool is used to create a machined bevel edge for weld preparation.
What is a Mill Hog?
A chain hoist, (chainfall,) is never intended for this type of pull.
What is horizontal pull? (side loaded)
This device controls the rate of shield gas reaching the weld area.
What is a Flow Meter.
This item provides a strong connection to the base materials in order to complete the weld circuit.
What is a Ground/Work Clamp?
A handheld tool that utilizes liquid and a bubble to check for and assure consistent alignment in materials.
What is, a (Torpedo) Level?
What is a "Saw-Z-All?"
This device attaches to an I-beam in order to provide a safe anchor point for lifts, while being equipped with rollers to allow for movement along the beam.
What is a Beam Trolley?
Located in the torch head, this part properly distributes shield gas over weld.
What is a Gas Lens.
______ carries current from the welding machine to the stinger with minimum resistance and loss of power.
What is Welding Lead? (weld cable)
A type of hammer used for "fitting" and alignment that does not deform or scar the base metal from striking.
________ should be checked on all discs or wheels, for compatibility, before being used with an angle grinder?
What is "Maximum RPMs?"
When using a shackle to hitch a load, to the hook, in what orientation should the shackle be?
What is "Pin to Hook?" (Pin up)
A sleeve like part that holds the electrode in place and allows electrical contact.
What is a Tig Collet?
Protective gear and lens that allows for viewing and proper operation of process.
What is a Welding Hood?
A tool used for alignment or prying that allows the user a safe distance from pinch points while adjusting or moving heavy material into position for bolt up or a weld. The shape of the tool can help in creating leverage.
- Alignment Bar
- Pry Bar (technically a different tool, with hook ends designed for demolition.)
This handheld saw is capable of cutting materials without producing sparks.
What is a portable band saw? Port-A-Band
All slings and straps must have what clearly labeled on an I.D. tag?
What is
- basic load capacities (weight limit)
- type of material
- manufacturer
A specific inert gas that is fed into pipe and tubing to protect the root face against contamination.
What is purge gas? (shield gas)
(backing gas)
Name a tool that is commonly used for self inspection of weld both during and upon completion.
What is a flashlight?
-mirror
-wire brush
-fillet gauge