ePub Hide and Seek
How many high comfort Flight Attendant jumpseats are there and where are they located?
There are three high comfort Flight Attendant jumpseats: at L1B, L2 and R2.
True or False?
The aircraft has two temperature zones: FWD and AFT.
False.
The aircraft has three temperature zones: FWD, MID and AFT.
What indicator on the handset do you push to call the pilots in normal mode?
What does a blue light on the Master Call Light Panel indicate?
A passenger call.
What does CIDS stand for?
Cabin Intercommunication Data System
Closet and storage compartment doors are equipped with two types of latches. What are they?
Rotary latches and Sliding latches (they must be manually engaged once the door is completely shut).
What are the two types of ovens on the Airbus 330?
Sell Convection Ovens and B/E Aerospace Steam Ovens.
What indicator on the handset do you push to call the pilots in emergency mode?
[PRIO CAPT]
What does an amber light on the Master Call Light Panel indicate?
A lavatory call.
Where are the Flight Attendant Panels located?
L1, L2 and L4.
The A330 is equipped with this IFE system. What is it?
What is the Thales i4500 IFE system?
True or False?
Cabin temperature is only controlled from the L2 FAP.
False.
Cabin temperature is controlled from the flight deck.
Once a call is made, up to two more stations may be added to the connection.
True or False?
The compartment doors are well latched when the red door locked indicator is showing.
False.
The compartment doors are well latched when the GREEN door locked indicator is showing.
What panel controls lighting for the MID entry area?
The L2 panel controls lighting for the MID entry area.
What is the first step to do if an air chiller Overheat Indicator is on?
If Overheat Indicator is on:
1.Turn the affected refrigeration system OFF.
**BONUS: What are the next steps?
The [SMOKE LAV] indicator/reset button is located on what Flight Attendant Panel(s)?
L1, L2 and L4.
What are the three steps to make an interphone call?
1. Remove the handset from cradle.
2. Press [INTPH].
3. Press the desired station.
What does a green light on the Master Call Light Panel indicate if it is accompanied by a HI/MED/LO chime?
A crew call for the In-Charge Flight Attendant.
Part of the L1 FAP, failure of any cabin system controlled by CIDS will be indicated on this.
What is the Program and Indication Module (PIM).
The PIM allows Cabin Crew to obtain status information on doors, water and waste. It can be used to change cabin temperature and assist Cabin Crew in solving problems with failed cabin systems.
There are two lavatory waste storage tanks. Each tank has a total capacity of 338 litres to collect waste from the toilets. Where AND how do you verify the waste quantity?
The waste quantity can be verified from the L1 FAP by pressing the [WASTE] button on the LCD screen. The information is displayed is a percentage of used capacity of the tanks.
To prevent sudden changes in temperature, what increments should cabin crew adjust the temperature selected by the flight deck?
Adjustments should be made in increments of +/-0.5°C to prevent sudden changes in temperature.
The cabin interphone system can be used to make these three things.
1. Flight Deck to Flight Attendant calls.
2. Flight Attendant to Flight Attendant calls.
3. Public Address announcements.
What panel has both green and red indicator lights?
Attendant indication panels (AIP). They are located beside each Flight Attendant station.
True or False?
Pressing any intensity button twice will switch all the lights off for the corresponding cabin.
True! :)