Foreman
Which revision of the Safety Manual are we currently using?
Rev 5
OSHA stands for......
Occupational Safety & Health Administration
What are the three parts of a personal fall aresst system?
Anchoring, lifeline, and body harness
ELECTRICITY HAZARDS
B.E.S.A.F.E
Burns
Electrocution
Shock
Arch Flash/ blast
Fire
Explosions
______ is the act of making sure your workplace is clean.
Housekeeping
More than 800 people die in a work environment every year. With this in mind, how many of these deaths are the result of accidents involving falls?
1/3
How far must the ladder extend over the top of what you're climbing to?
3 feet
What PPE are employers required to pay for?
everything but boots and prescription glasses
Insulating gloves must be inspected by the user how often?
What does the term “PPE” stand for in the context of workplace safety?
Personal Protective Equipment
If a ladder is 12 feet from the ground to the upper support structure, it should be ___ feet from the wall.
3
What is the height at which fall protection is required for surfaces with unprotected sides and edges
6 ft
What document be best to have when consulting a medical professional about possible exposure to a harmful chemical?
Safety Data Sheet (SDS)
The normal beating of a heart can be upset by an electrical current as small as....
75mA
What should you do if you witness a coworker experiencing an electric shock?
Call for emergency medical assistance and do not touch the person
How many quarts of water are required to to be on hand for each employee, per hour? In refrence to heat illness in situations where the temperature is over 80 degrees.
1 quart, 2 bottles.
Hard hats which must be worn during electric work
Protect against falling objects, high voltage shock/burns are which class of hardhat?
Class E
Where there is no specific OSHA standard, employers must comply with the OSH Act's:
A. Catch-All Standard
B. Final Notice
C. General Duty Clause
D. General Industry Standard
C. General Duty Clause
Class 1 rubber gloves have a miximum AC use voltage of _____.
7,500V
What is the purpose of safety inspections in the workplace?
To identify and correct potential hazards or safety violations
Which hierarchy of control is most effective?
Elimination
What year was the OSH Act signed?
1970
OSHA standards fall into what four categories?
General Industry, Construction, Maritime, and Agriculture.
The first step to be completed before working on a circuit is to ______.
check that the circuit is tagged and locked out
What are 3 sources of energy which can be controled using a LOTO program?
electrical, mechanical, hydraulic, pneumatic, chemical, and thermal.